PDA

View Full Version : Need pickup wiring help!



WEDGE
07-26-2012, 08:21 PM
Howdee,

I have a new DGT Standard and I want to put in the new set of Dragons I just got from their sell off. They have white, red, and black wires and a shield. Their is a wiring diagram in with them but it only says things like 'red to hot, or black to hot'......I dont know what is what . I looked at the DGT wiring and they only have it looks like a white wire and shield???

Can anyone please tell me, or better yet post a diagram, on how to wire in these Dragons and have coil split work? I looked on the PRS site and see the DGT wiring diagrams but the DGT pups have less wires coming off of them....

THANKS in advance!

]-[ @ n $ 0 |v| a T !
07-26-2012, 08:43 PM
The extra volume pot has me all screwed up or I'd post a diagram for you. Lemme think about it a little.

Shawn@PRS
07-26-2012, 09:48 PM
The red wire is your tap wire on both pickups. On one pickup, the black wire is hot and the white wire is ground. On the other pickup, the white wire is hot and the black is ground.

Fox77
07-27-2012, 01:43 AM
Wedge, good luck with the wiring, but where's the NGD post? :D

lookslikemeband
07-27-2012, 06:14 PM
Once you have the wires figured out.... this might be of some use:

http://www.guitarelectronics.com/product/WD2HH3T21_01/Guitar-Wiring-Diagram-2-Humbuckers3-Way-Toggle-Switch2-Volumes1-ToneCoil-Tap.html