View Full Version : Your specs for a private stock
12-23-2012, 04:20 PM
If you were going to spec out a private stock, what would you do?
Quilted maple top and back cap on a mahogany body.
5 way blade
Celtic knots in paua with gold surrounds.
Celtic knot on the neck heel
12-23-2012, 05:42 PM
Mahogany body and neck
Flamed maple top with mineral streaks
Braz fret board and headstock face with PS eagle
Color like a 59 LP like Page or Green
Phase 3 tuners
Ted style head stock
Fret wire like a 58
Maple binding on neck and body
I think that's it!
12-23-2012, 05:55 PM
thickly flamed maple top
Fade like a dragons breath with red outer into orange then yellow innner
nautural back with belly cut out like a strat
Highly flamed maple neck and board with the back of the neck stained bright yellow and glossed like the rest of the body
DGT neck carve and frets
matching headstock with the fade to match the front
Private stock eagle on headstock in shell to match inlays on fingerboard with banner that says 'Danielle' on it
Phase three tuners with maple buttons stained yellow to match yellow on fade and back of neck
covered 59/09 bridge and a DGT neck pup
stop tail- mixed hardware
Inlays on neck like the MEQ
Push-push for tone to coil split
That should do nicely!
12-23-2012, 06:54 PM
Singlecut - Semihollow flat back
408 Electronics and pickups
LR Baggs Piezo
Braz Rosewood Neck
Faded McCarty Sunburst
12-23-2012, 06:56 PM
Obeche in white wash, no cap
Flamed maple neck 513 carve
Ebony board and headstock veneer
Birds maybe white outlines
Phase III tuners, maple buttons whitewash
3 x "408" bass pickups, flame maple rings
5 way blade
3 x mini toggles for splaping
1 x push-pull to activate bridge PU (so you can have 3 PUs selected at one time)
2 piece bridge
12-23-2012, 07:31 PM
Korina Mira body
Bolt on 22 fret maple neck
24.5" scale length
Powder Blue/white pickguard
Someone please do this
Singlecut Trem body
flamed maple top, Red Tiger finish
25' scale length
new bird inlays are fine
binding on body and neck
HFS bridge, Dragon neck pikcups
1 volume, 1 push-pull tone, toggle on upper bout, and a killswitch
PRS Tremolo also has a trem up rout just like the Tremonti model.
Phase II locking tuners
Fund it. Because life is hard.
12-23-2012, 08:34 PM
Hmmm...I just sat here for a few minutes trying to come up with one single idea for a private stock electric guitar that I already don't have with my production instruments.
I couldn't think of one thing!
Just saved myself a lot of dough. ;)
12-23-2012, 08:59 PM
I still like this ...
12-23-2012, 09:11 PM
Perspex with lights.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.