Type: Posts; User: Bubbalou
While I cannot answer the Earvana question I can tell you that putting a USA PRS Nut on my SE along with Schaller Locking tuners and .010-.046 strings helped quite a bit on tuning stability.
Keep us posted on how it goes, ok
I just installed a PRS USA wide/fat wide/thin nut on my PRS SE Santana and Worked out quite well. In my case I had to put a thin shim underneath the nut but that is all (in my case)
I put Schaller 3x3 Locking tuners and Seymour Duncan VINTAGE BLUES Humbucker Pickup Set SH-1 '59 Neck & Bridge on my SE Santana. The tone is now even across all strings and no overbearing lows as...
Welcome from another newbie!
"YOUR KILLING ME SMALLS" :rock:
Yes, that is the reason Pure Nickel wrap strings are not as loud due to the only ferrous material is in the core. That can be compensated to a degree by raising the pickups closer to the string...
+1 That dispelled years of my unintended Disinformation gained from the web. Thank you for correction in posting this EM7
We agree on 2 areas I see. I do not care for ceramic magnet pickups. I tend to prefer Alnico II's but they are coming out with some good Alnico 5's lately.
blaren, interesting you stated Orange drops sounding sterile because that is exactly my experience and I usually avoid them. Good to hear your review of Mustard caps.
Are you having any consternation with the 406C Rotomatic "Buttons" being different from PRS???? I have been thinking about it and while they are a little different the 18:1 gear ratio along with the...
Note: uf and ufd mean same thing (microfarad) I just prefer that later.
You want to use .022ufd (capacitor's value in micro farads or 1/1000th of a Farad) and the 600v, 400v, 200v, 100v, 50 v is the...