I just acquired one of these in trade and want to confirm the Wiring diagram. If anyone with an '88-'89 CE with the Metal toggle switch could post a picture of their wiring that would be awesome!
Cheers,
Mitch
I just acquired one of these in trade and want to confirm the Wiring diagram. If anyone with an '88-'89 CE with the Metal toggle switch could post a picture of their wiring that would be awesome!
Cheers,
Mitch
Pretty sure what you need is right here:
Old style 5 way, and the old style sweet switch. Bottom of the page.
http://www.prsguitars.com/csc/schematics.html
1958 Martin 0-15
1988 PRS CE24
1995 PRS CE22
2000 PRS SC
2004 Heritage H150
2006 PRS Cu24 AP
2006 PRS McRosie
2007 PRS CuRo22
2007 PRS SE Soapy 2
2010 PRS SE 25th Anni Cu24
Mesa Single RectoVerb
Mesa Lonestar
Fender Hot Rod Deluxe
Peavey Classic 30
Wish I had pics of mine before I had it modded!Sorry!
There are lots of sources for Wiring Diagrams on the Internet. Without linking to another companies website, a Google search for "Guitar Wiring Diagrams" will produce enough links to fill in the blanks for you if no additional help is provided here.
Ok this photo may or may not help you. Nothing in here but the pots is original but it works. When I rescued this CE24 it had an aftermarket switch in it and nothing worked. I replaced the switch with as close to the right one as I had and put in SC245 pups. I reworked the wires that went to the switch and it now works. I didn't do a complete re-wire and maybe I should but it sounds so good I just play it. Here is the photo. The small white ones are ground, and there is a black one that goes to the ground bundle in the middle that is also ground for the pups. Good luck!
![]()
Last edited by AP515; 05-08-2013 at 06:45 PM.
1958 Martin 0-15
1988 PRS CE24
1995 PRS CE22
2000 PRS SC
2004 Heritage H150
2006 PRS Cu24 AP
2006 PRS McRosie
2007 PRS CuRo22
2007 PRS SE Soapy 2
2010 PRS SE 25th Anni Cu24
Mesa Single RectoVerb
Mesa Lonestar
Fender Hot Rod Deluxe
Peavey Classic 30
Thanks everyone, I know how the guitar Is supposed to be wired.
What I was looking for is what The Metal Toggle 3-way that PRS used in the 1st and early 2nd year actually was. Aldwyn helped me out a TON and I found out they actually used an ALCO MTG 226PA Switch. I have a couple incoming
Cheers,
Mitch