Results 1 to 2 of 2

Thread: Dirty Switch?

  1. #1
    Occasionally Onery Member CantankerousCarl's Avatar
    Join Date
    Apr 2012

    Dirty Switch?

    My SE CST24 cuts out mostly on the neck pickup; when I jiggle the pickup switch back and forth it outputs normally. That one I got used.

    Same thing is happening now to the SE Santana I got used last December.

    Sounds like this could simply be dirty switches? Any suggestions on remediation, or there something else I should examine other than the switches?
    1990 CE24 MT | 1991 CU24 | 1991 CE24 | 1992 CE24 MT
    1993 STD 24 | 1997 CE24 3pc MT | 2008 SE Semi-Hollow Soapbar
    2011 SE Akesson | 2011 CU24 GC Throwback | 2012 Signature Limited
    2013 408 Brazilian | 2013 Paul's Guitar | 2013 S2 Mira | 2013 Hollowbody II
    2013 CU24 Swamp Ash Limited | 2014 SE Zach Myers (incoming)

  2. #2
    Cream Crackered Mikegarveyblues's Avatar
    Join Date
    Apr 2012
    Warrington, Nr Liverpool UK
    Could be.

    Get some contact cleaner or switch cleaning lubricant as it may be called. In the UK I use Servisol Super 10. Just give it a spray on and around the contacts and flick the switch back and forth a few times. Useful for the pots if they start getting scratchy too.

    It may also be cold or dry solder joints. Open up the switch cavity and have a look to see if anything is untoward.

    Failing those two things then it could be a faulty switch and need replacing. Hopefully it's just some dirt causing the issue.
    Last edited by Mikegarveyblues; 07-08-2012 at 07:09 PM.
    Modified SE Bernie Marsden, SE Custom 24 2012, Fender Strat
    Laney Lionheart L5T-112, Fender Mustang 1
    Wishing for a Blue Bernie!
    Click here for SE Bernie Marsden demo!
    Lessons, covers, backing tracks,

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts