Results 1 to 10 of 10

Thread: PRS Tremonti SE Blacktop project

  1. #1
    Junior Member
    Join Date
    Oct 2012
    Location
    Belfast N Ireland
    Posts
    5

    PRS Tremonti SE Blacktop project

    Hello everyone I've been a lurker on the forum since it started after the demise of birds and moons. I've just finished my most ambitious project and thought I'd share with fellow prs fans. I picked up a 2004 Tremonti SE which was in a bit of a sorry state. It had chips and dents all over the front, back and sides, it had obviously been dropped several times and the bridge bushings would no longer stay in causing the bridge to pull forward making it impossible to get the guitar playing without horrible fret buzz coming through. The pickups had been changed to emg 81 and 85 (badly I might add, they had tried to use the original mini pots with them) and the nut was ruined.

    My main guitar is a goldtop ce22 and I always wanted a singlecut as backup. I traded my broken amp for this broken guitar and set to work to see if someone with my limited skills could get this guitar up and running again.

    After having a good look at the guitar I decided to try and go for a 50's style blacktop look to compliment my goldtop ce22 so the first job was to strip the guitar down and get the finish off the back and sides. I did it the long slow way by sanding it off by hand. It took a LONG time to get it all off working the odd night and weekends when I got the chance. the next few pics will show the various stages of getting the old finish off. Unfortunately I stupidly didn't take any before pictures.

    Here you go hopefully you all enjoy

    Where I got to after my first session sanding. I really didn't appreciate at the start how long this was going to take



    By the time I got to this stage I at least knew I had some decent wood under there, Much better than I had anticipated



    I was completely paranoid when taking the finish off the neck in case I sanded too much in any one area



    The sealer layer on the neck and round the horn took a really really long time.





    At this stage I was surprised but absolutley delighted at the quality of the wood and the way it had been matched.



    Next update later today.

  2. #2
    subscribed!
    Alex

  3. #3
    Junior Member
    Join Date
    Apr 2012
    Posts
    31
    I've hand sanded a tremonti se before too, they really use some gorgeous wood on the se's. I ended up with really strong forearms and rough hands, good luck.
    Last edited by Jhenri; 10-20-2012 at 04:24 AM.

  4. #4
    Junior Member
    Join Date
    Oct 2012
    Location
    Belfast N Ireland
    Posts
    5
    It was an absolute ballache getting all the finish off but totally worth it. I'll upload the next part after I get out of work.

  5. #5
    Junior Member
    Join Date
    Oct 2012
    Location
    Belfast N Ireland
    Posts
    5
    Next update pics after the first few coats of tru oil on back and sides.







    Next I used Liberon 0000 wire wool to remove a lot of the excess gloss from the front. I always find a lot of korean instruments are a little plasticky. This will be polished up when the rest of the true oil is being buffed.



    A few pics of the back and neck after the tru oil was finished and buffed





    The next update will contain the finished guitar and some shots with his bigger US brother

  6. #6
    Junior Member
    Join Date
    Oct 2012
    Location
    North GA
    Posts
    8
    Amazing job so far!

  7. #7
    Senior Member sergiodeblanc's Avatar
    Join Date
    Apr 2012
    Location
    Downers Grove Il.
    Posts
    5,163
    Lookin' good!

  8. #8
    Junior Member
    Join Date
    Sep 2012
    Location
    Kansas City, MO
    Posts
    34
    You got some great hunks of mahogany for the back and neck. Can't wait to see the finished product.

  9. #9
    Junior Member
    Join Date
    Sep 2013
    Location
    Australia, then just keep going south till you can't go south any more.
    Posts
    15
    What? One of the benefits of reading old posts is getting to live the whole story in one hit. Getting here, then .... nothing, is just.... well it just hurts.
    AdamMD, did the princess ever find the prince? Was there a happy ending?

  10. #10
    I always love these posts, but not when they are part finished.

    Checkout the 'Design on a 'Dimebag' threads here, Sergio does some great work in those.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •