Results 1 to 4 of 4

Thread: From 009 to 010

Hybrid View

  1. #1

    From 009 to 010

    Hi FOlks- glad to be here

    Got a new Se Custom 24
    Can I just go from 009 to 010 ?
    Or do I need to do an intonation ?
    Any suggestions and pointers welcomed

  2. #2
    Member bretwomack's Avatar
    Join Date
    May 2012
    If you prefer 10's, put them on and then check the intonation. If it's a little off, just adjust the saddles to fix it.

    Tune your guitar and then lightly fret the notes on the 12th fret. If it rings sharp, lengthen the string by turning the screw clockwise; if flat, shorten the string.

  3. #3
    Plank Spanker justmund's Avatar
    Join Date
    Apr 2012
    Down under, down under
    You'll definitely need to adjust the bridge, since putting on heavier strings will increase the overall tension of the strings, and you'll need to adjust the trem spring claw in to compensate.

    You might need to do intonation, but try them and see what happens.

    You will also need to make sure the strings are free to move through the nut slots. Cutting wider nut slots is a little more difficult, and best done by someone experienced.

  4. #4
    so just like a strat type guitar I'll need to tweak and dial in my new gauge
    Its is the nut that scares me a bit - it seems so perfect!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts