Results 1 to 4 of 4

Thread: Need Help guys

  1. #1
    Junior Member
    Join Date
    Nov 2012
    Posts
    12

    Need Help guys

    Hi guys,i was just wondering on how to properly adjust a truss rod on a PRS Tremonti SE should o loose the truss rod first before i tighten it?or?

  2. #2
    Junior Member aPeRSon's Avatar
    Join Date
    Apr 2012
    Location
    Scotland
    Posts
    20
    There are a few things I'd recommend when adjusting the truss rod for the first time on any guitar:
    * Put a mark on the nut, so you can always go back to exactly where you started.
    * Loosen it 1/8th of a turn first, then tighten it back to where it was.
    * If you feel that it's harder to turn than you think it should be, then stop. Immediately.

    The more experienced folks check relief by eye, but I use a 24" steel rule (cut to length, so it's just long enough to span the first and last frets) and a set of feeler gauges, but I do get a bit OCD about guitar setups...
    '06 Custom 22
    '09 513
    '12 SE Angelus Custom

  3. #3
    Give this a read, as well.

    http://www.prsguitars.com/csc/trussrod.html
    One Life

  4. #4
    Junior Member
    Join Date
    Nov 2012
    Posts
    12
    Thanks guys

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •