Results 1 to 2 of 2

Thread: SE 20 Footswitch

  1. #1
    Junior Member
    Join Date
    Oct 2012
    Posts
    1

    SE 20 Footswitch

    I bought an SE 20 Combo amp on ebay and the guy sent the wrong footswitch cable. I bought a new TRS stereo cable and the footswitch works for a few minutes then won't switch channels. is there something special about the original cable or do I have more serious problems?
    Last edited by mw1958; 11-30-2012 at 01:15 PM.

  2. #2
    Senior Member andy474x's Avatar
    Join Date
    May 2012
    Location
    West Michigan
    Posts
    1,100
    I haven't had a problem like this with my SE amp... I think any stereo cable should work. Try to check it for a short or bad connection, but if it's not that you may have a problem in the amp or footswitch. You could also try a footswitch from another amp, any dual footswitch with a stereo jack should work (just to get an idea of where the problem is).
    -I'm no expert, but it seems to work and I haven't electrocuted myself yet. Which is pretty much the standard I live by.

    SE Custom 24 25th Anniversary - SE Akesson+57/08's - SE 30 Head/Cab

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •