Results 1 to 4 of 4

Thread: Trem making a clicking noise

  1. #1
    Junior Member
    Join Date
    Dec 2012
    Posts
    2

    Trem making a clicking noise

    Hi new here so be gentle

    My tremolo is making a clicking noise and PRS Custom 24 keeps going out of tune

    Strings Ernie Ball Titanium Coated 08's

    any ideas?

    Steve

  2. #2
    Plank Spanker justmund's Avatar
    Join Date
    Apr 2012
    Location
    Down under, down under
    Posts
    1,536
    Hi Steve, welcome! First things first, unless you know what you're doing, please resist the urge to touch it.

    There's no reason why a properly adjusted trem should "click" when used. It's possible the knife edge has popped out of the recess in the trem screws.

    Are you adept at setting up guitars? If not, take it to a luthier and have them check it over. The main thing with PRS trems is making sure all the spring/string tension is relieved before making any adjustments.

    There's setup guides and videos online if you're handy with tools/ruler/gap gauges. Good luck, Justin

  3. #3
    Member Artist's Avatar
    Join Date
    May 2012
    Location
    Philadelphia, PA
    Posts
    163
    Are you sure the clicking is not from the nut area? If the nut is not cut properly the strings may be getting caught in the nut and producing that noise when moving the tremolo.

    However i find it hard that this is the case as you are running thinner than standard strings.

    Can also be the springs in the back.
    '96 CE-24 with Bird Inlays - VY | '91 CE-24 (road warrior) - VS | '06 SC Artist - Blue Matteo Satin | '12 Tremonti SE Custom | MESA Roadster

  4. #4
    chief Shawn@PRS's Avatar
    Join Date
    Aug 1985
    Location
    Stevensville, MD
    Posts
    3,424
    A couple of things come to mind. 1) one or more of the fulcrum screws are too high and the knife edge is slipping off he screw causing the clicking sound. 2) The wrap on your strings is too high on the saddle and is sitting in the groove (instead of behind the saddle groove) and the wrap is sliding across one of the transition points on the saddle.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •