Page 1 of 2 12 LastLast
Results 1 to 20 of 28

Thread: Ever take a tool to your PRS?

Hybrid View

  1. #1
    Senior Member Rango's Avatar
    Join Date
    Aug 2012
    Location
    The FAR SIDE of the Middle of Nowhere
    Posts
    970

    Cool Ever take a tool to your PRS?

    Normally I leave "Set Up" to pro's but as I play more...I'm getting bolder about wanting my guitar HOW I want it to be...

    So the action on my P22 was pretty high after everything settled in... High enough that it bothered me playing some stuff up the neck. I was thinking about getting it set up and looking the guitar over there were really only the TWO bridge screws to adjust! So I started digging on our PRS site and found THIS:
    http://www.prsguitars.com/csc/setup.html

    Which led me to THIS:
    http://www.prsguitars.com/csc/bridges.html

    So after reading it I got brave! Hey I was going to get it set up anyway, what have I got to lose? So I followed the directions and was able with a couple of cycles to get it back in "spec". All by my lonesome!

    So have you worked on your own guitar?
    If so and how far do you go?

    ->Man I don't even change STRINGS...

    ->Okay, I change strings but THAT is it

    ->I'll tweak small stuff, saddle heights, truss rod adjustments

    ->It's mine, it's all fair game! Pass the soldering iron!
    Last edited by Rango; 12-18-2012 at 06:22 PM.

  2. #2
    Pincher of Harmonics Blackbird's Avatar
    Join Date
    Apr 2012
    Location
    United States
    Posts
    414
    Congrats on the adjustments

    My level of involvement varies with how expensive and new the instrument is. Typically pickup changes, pot swaps, and a small amount of soldering are my limits. But I go really slow and take my time.

    The scariest task I've tackled was using a reamer to make the hole larger for the 3-way drop-in kit. Talk about puckered.
    12 408 - 12 DGT - 09 Tremonti II - 98 CU24 - 97 CE22 - Mesa MarkIV - Kemper Profiler Amp - EVH 5150 III - PRS Archon

  3. #3
    Bobble Head Moderator JMintzer's Avatar
    Join Date
    Apr 2012
    Location
    Potomac, MD
    Posts
    1,574
    After a "Tech Day" at Chiba's house, many moons ago, I do all of my own set-ups, tweak the truss rod, as needed, set the intonation. AFA wiring goes? No way, no how... I suck at that...


    Jamie
    ---Jamie---

    My Gear

  4. #4
    Wheels cjmwrx's Avatar
    Join Date
    Jun 2012
    Location
    Crystal Lake, IL.
    Posts
    406
    ->It's mine, it's all fair game! Pass the soldering iron!
    BDR-529

  5. #5
    Happy Egads's Avatar
    Join Date
    Oct 2012
    Location
    Boulder, CO
    Posts
    2,580
    Funny timing, and ties into my post (http://prsguitars.com/forum/showthre...ersonalization). The funny timing piece is that I just received a rosewood pickguard for my Mira (pics soon). When I went to install it, one of the pot holes was too small. Of course, I tried to force it, and got it stuck half way. To get it out, I had to wiggle it back and forth...which lead to the ground from the mini-toggle breaking.

    Out came the soldering iron, a drill, and a little bit of nerves. All is well. The pickguard is awesome, and guitar sounds the same as before (no additional hum).

    On my PRS guitars, I'm pretty timid. Setups and slight adjustments are normally it. It's was my first soldering iron experience with a PRS.

  6. #6
    Senior Member sergiodeblanc's Avatar
    Join Date
    Apr 2012
    Location
    Downers Grove Il.
    Posts
    7,819
    It's mine.

  7. #7
    Mine.

    One Life

  8. #8
    Senior Member clcwarlock's Avatar
    Join Date
    Apr 2012
    Posts
    306
    I am very comfortable with an iron and I ripped pick ups out of anything but I still need help on intonation and height adjustments. I am going to try one of these days.

  9. #9
    Junior Member
    Join Date
    Aug 2012
    Posts
    18
    The only thing I've touched on my SE was filing sharp corners off the nut. Someone should send those guys a memo! It wasn't a big deal i just got excited trying not to bleed on the new guitar was all.

  10. #10
    Name Manglin' Putz alantig's Avatar
    Join Date
    Apr 2012
    Posts
    3,363
    The only tool that touches my PRSi is ME!

    Swapped pups in my CU24. Strap locks on everything. Other than maybe a truss rod tweak or intonation, that's it.
    Alan

    "I watched approximately 45 seconds of 'Rock Of Ages'. It was like getting punched in the soul." - Abby Krizner

  11. #11
    Cream Crackered Mikegarveyblues's Avatar
    Join Date
    Apr 2012
    Location
    Warrington, Nr Liverpool UK
    Posts
    2,512
    I've done a fret dress on my Squier and Dean bass but wouldn't dream of doing it on my SE's or Strat.

    Happy to do my own setups and electrics.
    Modified SE Bernie Marsden, Fender Strat
    Laney Lionheart L5T-112, Fender Mustang 1, POD HD 500X
    Wishing for a U.S. made Blue Bernie!
    Click here for SE Bernie Marsden demo!
    Lessons, covers, backing tracks, etc...www.youtube.com/mikegarveyblues

  12. #12
    Senior Member cosmic_ape's Avatar
    Join Date
    Apr 2012
    Location
    Los Angeles, CA
    Posts
    213
    Being a lefty, I had to get over myself pretty early in the game. Some lefty guitars come with regular "right handed" pots reverse wired (just so us lefties can use them as you righties do). The only problem when reverse wiring is that for the most part, when the pots are reversed wired they almost function as on/off switches, which defeats the purpose of the pots in the first place. Fender does this (soooo annoying!!!). Gibson on the other hand, doesn't bother figuring a mirrored system and wires everything right handed, which makes for a fun adjusting period while switching guitars!

    Personally, I like to wire my guitars left handed, so when I want to turn either knob up, I roll them in a motion away from the bridge (just like you guys do). In order to do that, I have to purchase lefty CTS pots for all my guitars and rewire every single pot! Fun!

    It gets better! There is no such thing as a lefty push/pull pot, so my PRS's volume knob is wired lefty, while the tone knob (the one doing the splitting) is wired righty. Mind bending when you play live, to say the least!

  13. #13
    Bridge constructor MykeWright's Avatar
    Join Date
    Apr 2012
    Posts
    107
    I've done everything from a nut replacement (on a SE), pickup replacement and rewiring with resistors on the coil-tap to ground and a new push-push tone pot (McCarty), fret levelling, crown and polish (pretty much all my PRSi), fret-end rounding and rolling/scalloping fretboard edges (McCarty) and all basic set-up work. I'm not inclined to do a refinish work as I've not got the space or equipement (and therefore haven't got the experience yet).

    There's a few more pickup swaps coming, including a swap in my SCHB Standard Piezzo, which will probably include the addition of two 408 style coil tap switches - if I can work out the best place to put them. The ME is going to be getting new pickups as well. The SCHB and Studio will probably get the fret-end/fretboard edge treatment as well as it's improved the McCarty immensely.
    2Tek'd to the MAX

  14. #14
    Twang Banger crgtr's Avatar
    Join Date
    Apr 2012
    Location
    Nashville, TN
    Posts
    1,218
    I'll do everything but fretwork & "real" finish work. Actually I think its impossible for me NOT to tear my guitars apart and tweak them until I get them to fit me. Tone & feel.
    Even my NOS ME has been bastardized. 4 or 5 sets or pickups, new knobs & pickup rings, volume bleed kits, etc...... I feel it's all just a way of making the guitars "mine". I think they play & sound better.
    Chris Reynolds...Nashvegas TN
    CR Guitar Demos
    #1 fan of Doug "DA MAN" Sewell!!

  15. #15
    Cream Crackered Mikegarveyblues's Avatar
    Join Date
    Apr 2012
    Location
    Warrington, Nr Liverpool UK
    Posts
    2,512
    Quote Originally Posted by crgtr View Post
    I feel it's all just a way of making the guitars "mine". I think they play & sound better.
    Same here. I'll only do mods if I feel it's needed but i'll admit I get some pleasure out of the fact it's the way I want it and isn't the same as every other one out there.
    Modified SE Bernie Marsden, Fender Strat
    Laney Lionheart L5T-112, Fender Mustang 1, POD HD 500X
    Wishing for a U.S. made Blue Bernie!
    Click here for SE Bernie Marsden demo!
    Lessons, covers, backing tracks, etc...www.youtube.com/mikegarveyblues

  16. #16
    Geezer wilerty's Avatar
    Join Date
    Apr 2012
    Location
    Syracuse, New York
    Posts
    305
    Give me a capo and a feeler guage and I'm ready to go on the neck. No wiring or refinishing though ...
    Bill

    PRS Private Stock #3568
    PRS Swamp Ash Special
    Mesa Mark V combo
    Fishman Loudbox Artist

  17. #17
    I'll take any tool to any guitar if it needs to be done. Screwdriver, hammer, soldering iron, drill, router, whatever it takes.
    You just haven't lived until you've routed Les Pauls and Singlecuts for Floyds!



  18. #18
    Just a member JustRob's Avatar
    Join Date
    Sep 2012
    Location
    Severn, MD
    Posts
    1,775
    [QUOTE=_pete_;35975]I'll take any tool to any guitar if it needs to be done. Screwdriver, hammer, soldering iron, drill, router, whatever it takes.
    You just haven't lived until you've routed Les Pauls and Singlecuts for Floyds!

    Nice work. That's sweet!
    Not yet ready to "live" like that on my PRSi, because if it went wrong I would certainly feel like dying.

  19. #19
    Serial Acquisitionist
    Join Date
    May 2012
    Location
    Milwaukee, WI
    Posts
    77
    Done it all short of frets and finishes. Would love to have the time to learn fretwork though, finishing not so much.

  20. #20
    Senior Member Jazzedout's Avatar
    Join Date
    Apr 2012
    Location
    Greece
    Posts
    391
    I do everything I need on my guitars.
    Pickup swaps, piezo install, complete setups, even refinishes when I had more free time.
    My last (yet unfinished, needs clearcoat) project is this, inspired by PRS's faded blue Jean finish.
    1992 PRS Cu24 Tortoise Shell, "10",Birds, Reg Neck
    2005 PRS 513 Brazilian Rosewood Orange

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •