Results 1 to 4 of 4

Thread: My PRS model idea

  1. #1
    Junior Member
    Join Date
    Jul 2012

    My PRS model idea

    I know everyone has a PRS model idea so this is nothing new. And I also know that PRS has been mostly focusing on the higher end as of late. But here's my idea....

    -mahogany body/top (think standard)
    -maple neck/board (nothing super fancy or flamey)
    -solid black birds
    -solid white or black body
    -2 hums (something similar to the original dragons) - think ROCK (not vintage)
    -22 and 24 fret models (although I'm guessing most would prefer 24)
    -pattern thin (24), pattern (22)

    So a straight up ROCK machine. Sort of budget but not cheap. A great US made PRS but with pre-selected specs (sort of like what Suhr does). Thoughts??


  2. #2
    Angry Southern Gentleman Hopeful Sinner's Avatar
    Join Date
    Apr 2012
    I've been wishing for something like this to come along for a while... I would be all over it...

  3. #3
    Senior Member VHTStark's Avatar
    Join Date
    Apr 2012
    Edmonton Alberta Canada
    I would be all over this! Sounds kinda like a hot rodded standard!

  4. #4
    Salad Dodger
    Join Date
    Dec 2012
    My holy grail PRS would be a cross between a CE24 and an EGII
    Alder body and Maple Cap
    1989 profile Bolt on Maple neck and Rosewood F/'board. 22 and 24 fret option
    Humbucker and 2 P90's (or fralin domino pick ups) 5 way blade switch plus coil tap on tone pot.
    Plain translucent finish.

    I have a 89 CE24 Alder Body/Maple Cap with humbuckers which is a tone monster.
    The 24 fret Rosewood/maple bolt on neck has a nice profile which is close to but slightly slimmer than the regular profile on my 1986 prs.
    I love the tone and fast switching options on my EGII and to combine the best bits on to one guitar would be great.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts