Results 1 to 9 of 9

Thread: Has anyone use a small Tremol-No on SE trem?

  1. #1

    Has anyone use a small Tremol-No on SE trem?

    I am looking at getting a SE custom 24. Though I am not a fan so much of trems mainly the putting on new strings. I also have an ibanez with the original edge. So I thought it would be a good excuse to geg a tremol no.

    But the original edge calls for a small and the prs trem calls for a large. Not really surr the difference between the two. I am guessing it has to do with spring spacing or the distance between the block and claw. I would really like it to be able to pull double duty. That way if I happen to like one trem over the othet I could just make the one I don't like a hardtail.

    There is also a pin type. Again I am not sure how that works or ho large the holes are on a guitar I have not ordered yet.

    Thanks for any info you can give me. As a side note I would try blocking it but I have no wood working tools to cut it precisely.

  2. #2
    "Large" on the tremol no, refers to the clamp that attaches to the block (I think).
    You can acheive the same results with an "L" bracket or a block of wood.

  3. #3
    Senior Member swede71's Avatar
    Join Date
    May 2012
    Location
    Stockholm
    Posts
    646
    Large clamp for PRS guitars.

  4. #4
    I generally dislike uproutes and considered blocking the trem on my new Tremonti Custom SE to just allow for "dive only". My thought was that it would help increase tuning stability, but the more I play the guitar, the more I'm convinced that it's really not necessary. I've even tried drop D tunings and haven't has any issues, which really surprised me.

    I did just purchase some phase II tuners though.

  5. #5
    dbonanno

    What is a "L" bracket?

    Also what is a up route?
    Just something to give the trem more freedom of movement?

  6. #6
    Quote Originally Posted by Drastion View Post
    dbonanno

    What is a "L" bracket?
    Just a common "L" bracket, an allen screw, and a couple wood screws ...
    All can be purchased at your local hardware store, Home Depot or Lowes.


    Quote Originally Posted by Drastion View Post
    Also what is a up route?
    Just something to give the trem more freedom of movement?
    An "uproute" is a routing behind the tremolo that allows you to pull up on the bar to raise the pitch.
    A "floating" tremolo, if you will.

  7. #7
    Member Harw00d's Avatar
    Join Date
    Nov 2012
    Location
    Derby, UK.
    Posts
    60
    Quote Originally Posted by dbonanno View Post
    Just a common "L" bracket, an allen screw, and a couple wood screws ...
    All can be purchased at your local hardware store, Home Depot or Lowes.
    That is so much better than my method of just jamming stuff in the gap!
    PRS SE 245 (Heavily Modified), Warman Guitars 'Warbird', ESP/LTD EC-256, ESP/LTD F-2005, Maverick F3, EVH Peavey Wolfgang, Godin Progression.
    Laney Ironheart 120w Head, Peavey 6505, Laney Ironheart 4x12.
    Too many pedals, mounted on an Ikea shelf.
    Laney Amplification and Warman Guitars endorsee.

  8. #8
    chief Shawn@PRS's Avatar
    Join Date
    Aug 1985
    Location
    Stevensville, MD
    Posts
    3,899
    Quote Originally Posted by dbonanno View Post
    Just a common "L" bracket, an allen screw, and a couple wood screws ...
    All can be purchased at your local hardware store, Home Depot or Lowes.



    An "uproute" is a routing behind the tremolo that allows you to pull up on the bar to raise the pitch.
    A "floating" tremolo, if you will.
    That's a great idea!

  9. #9
    Quote Originally Posted by dbonanno View Post
    Just a common "L" bracket, an allen screw, and a couple wood screws ...
    All can be purchased at your local hardware store, Home Depot or Lowes.




    An "uproute" is a routing behind the tremolo that allows you to pull up on the bar to raise the pitch.
    A "floating" tremolo, if you will.
    Huge thanks for that pic! I see so its like the drop only mode of a tremol no. That is a great and super simple idea. Strange no company has put something like that in a guitar. Especially how dead simple it would be to adjust to get the trem perfectly level.

    Thanks for the info on the trem also. So the prs trem not so much like a ibanez edge or floyd. More like a rocker with more slight changes in pitch that than big dives and pulls.

    May need to try out the prs design now sounds interesting. If my guess is right anyways.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •