Results 1 to 2 of 2

Thread: PRS 250 pickups in a Custom 24 w/ 5 way rotary wiring question??

  1. #1
    Junior Member Adambomb's Avatar
    Join Date
    May 2012
    Posts
    6

    PRS 250 pickups in a Custom 24 w/ 5 way rotary wiring question??

    Also posted in Tech Corner: I was wondering how I would wire up the PRS 250 pickups in a CU24 with 5 way rotary since the bass pickup is braided 2 conductor and the treble pickup is 4 conductor?? I'm only doing this for my friend since I'm trading him my CU24 with 57/08's for his SC250 with 250 pickups. But I'm putting the 57/08's in the SC250 (yall think it'll sound like my old 245?) and then putting his 250 pickups in my CU24 with 5 way rotary.

    So I'm just wondering if I would loose position 4 on the rotary of the CU24? Is there any way I can wire the SC250 pups with the CU24 5-way rotary?

    ANY help would be really appreciative!! I'm going to attempt this tomorrow.

  2. #2
    I don't think the SC250 Neck PU can be used with the 5 way rotary.. I think the Bridge can though... I don't think you can split the Neck PU
    ZebraPRS
    Guitars: 1967 Gibson Byrdland; 1995 PRS Custom 24; 20?? PRS Custom 24 Custom Zebra Stripes, 2009 25th McCarty NF, 2011 Custom 24, 2013 PRS HBII,
    Amps: PRS Original Sewell 50 watt #43 with Paisley 2x12 cab; PRS Pre-Prod 2 Channel C with 2x12 DB Cabinet, PRS Custom 10 watt head

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •