Results 1 to 14 of 14

Thread: 3D Printed Instruments

  1. #1
    A Top (and Heart) of Gold Goldtop's Avatar
    Join Date
    Apr 2012
    Location
    Texxas, USA
    Posts
    3,301

    3D Printed Instruments

    I think 3D printing is really interesting, and the possibilities of using the technology in the making of musical instruments seems to have a lot of potential. Maybe not in actually producing the final instruments (yet), but in the development and testing of new designs, etc. For one thing, just imagine the wood that could be saved in one year if prototypes could be developed this way rather than with raw wood. Or if lower end, beginner instruments were made through 3D printing, thereby saving resources for other needs.

    Here is a short video with a designer who uses 3D printing to design guitars. Then there is a link to a series of ten videos where an entire band performed with 3D printed instruments.



    http://www.youtube.com/watch?v=cjomc...CBnRTHK7nM0Sy2

    Goldtop Lloyd
    Last edited by Goldtop; 02-05-2013 at 08:19 AM.
    'Did you ever get down on your hands and knees and beg a potato to get fat?' - Ezra Craddock

  2. #2
    chief Shawn@PRS's Avatar
    Join Date
    Aug 1985
    Location
    Stevensville, MD
    Posts
    3,666
    This technology is remarkable! I think you're right about using 3D printing to create some entry level instruments, but I don't see the high end market going in this direction any time soon. I do think 3D printing will become common place in another 10-15 years and folks will be able to make many of their own products. The money will be in creating the CAD drawings needed for the computer.

    15 years ago who would have thought that we would each be carrying around a small computer in our pockets?

  3. #3
    Very interesting, thanks for the link!

  4. #4
    Someone scanned a Stradivarius and printed a copy. I'll try to find the original article.

    One Life

  5. #5
    chief Shawn@PRS's Avatar
    Join Date
    Aug 1985
    Location
    Stevensville, MD
    Posts
    3,666
    Quote Originally Posted by ]-[ @ n $ 0 |v| a T ! View Post
    Someone scanned a Stradivarius and printed a copy. I'll try to find the original article.
    Wouldn't that be a "Stradddivarius"? Get it? 3 d's.

  6. #6
    Senior Member themike's Avatar
    Join Date
    Apr 2012
    Posts
    1,838
    I wouldn't make an instrument out of it, but a la Jay Leno and his garage I would use it to make plastic parts. It would be good to make pickup rings, knobs and even tuner buttons!
    Paul Reed Smith 7 - S t r i n g A c t i v i s t | Fueled by P T C

  7. #7
    Bless the Blues 38Roars's Avatar
    Join Date
    Apr 2012
    Posts
    292
    As the ink-jet type technology grows, I am certain you will see from VERY interesting and Graphic looks we have NEVER seen before...
    This type of technology is changing many products in the design community....
    Seriously, you better hold on to your hat!

  8. #8
    A Top (and Heart) of Gold Goldtop's Avatar
    Join Date
    Apr 2012
    Location
    Texxas, USA
    Posts
    3,301
    Several months ago, there was a new Jeff Dunham special. It was a separate show produced as a lead up to his latest performance DVD. In it, Jeff showed how he had developed a new character for his act. The character was Achmed's son - Achmed Jr. - and the way Jeff did it is he bought one of these 3D printers and installed it in his garage at home. He then had some concept artwork done, got the parameters, and fed them into the printer. Then the thing started printing, and it continued on for something like twenty plus hours. The end result was a three dimensional head of the new character. From that, Jeff made molds so he could make the new head in plastic and have endless, cheap replacements. Then a little airbrushing, some parts for the body, clothes, and he was on his way.

    Just imagine the uses for this technology someday. All this, and some of us still manage to burn the toast once in a while...

    Lloyd
    'Did you ever get down on your hands and knees and beg a potato to get fat?' - Ezra Craddock

  9. #9
    A Top (and Heart) of Gold Goldtop's Avatar
    Join Date
    Apr 2012
    Location
    Texxas, USA
    Posts
    3,301
    Quote Originally Posted by Shawn@PRS View Post
    Wouldn't that be a "Stradddivarius"? Get it? 3 d's.
    Now you're just 'fiddling about', Shawn!

    Lloyd
    'Did you ever get down on your hands and knees and beg a potato to get fat?' - Ezra Craddock

  10. #10
    A Top (and Heart) of Gold Goldtop's Avatar
    Join Date
    Apr 2012
    Location
    Texxas, USA
    Posts
    3,301
    Quote Originally Posted by LSchefman View Post
    Very interesting, thanks for the link!
    You're welcome. For some reason, this is just fascinating to me.

    Lloyd
    'Did you ever get down on your hands and knees and beg a potato to get fat?' - Ezra Craddock

  11. #11
    Senior Member Daniel's Avatar
    Join Date
    Apr 2012
    Posts
    620
    3D printing is pretty cool. My daughter made this puzzle as a project for her Intro to Engineering Design (9th grade) class last Fall using CAD software and the 3D printer in the class. The pieces are hollow.






  12. #12
    Senior Member Dirty Bob's Avatar
    Join Date
    Apr 2012
    Location
    State of Confusion (NY)
    Posts
    1,843
    Quote Originally Posted by Daniel View Post
    3D printing is pretty cool. My daughter made this puzzle as a project for her Intro to Engineering Design (9th grade) class last Fall using CAD software and the 3D printer in the class. The pieces are hollow.





    That would be a great stocking stuffer for Christmas!
    -Bob

  13. #13
    Senior Member Rango's Avatar
    Join Date
    Aug 2012
    Location
    The FAR SIDE of the Middle of Nowhere
    Posts
    971
    Very interesting! I ended up passing the link around to some guys at work. Exciting to think that at some point NOTHING would be obsolete for lack of mechanical parts - If you have a drawing you can make the part. THE new business model for parts suppliers - parts on DEMAND - print up the part when the order comes in! NO INVENTORY!

    Very exciting stuff.
    Last edited by Rango; 02-06-2013 at 12:07 AM.

  14. #14
    Cream Crackered Mikegarveyblues's Avatar
    Join Date
    Apr 2012
    Location
    Warrington, Nr Liverpool UK
    Posts
    2,295
    Those guitars are pretty cool. I really like this whole 3D printing thing, so many uses!
    Modified SE Bernie Marsden, Fender Strat
    Laney Lionheart L5T-112, Fender Mustang 1
    Wishing for a Blue Bernie!
    Click here for SE Bernie Marsden demo!
    Lessons, covers, backing tracks, etc...www.youtube.com/mikegarveyblues

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •