NGD: SCHB II

[jbloggs]

Nice.

What's the body thickness and weight of these guitars??

[vchizzle]

All the weights I've seen listed have been 5.5-6.5#. Kinda tough to measure thickness with both top & back arched. I'll try to measure tomorrow. Holding it, feels just a little thicker than a solid body SC

[TAJ]

Great looking flames!! Congrats!

[jbloggs]

thanks for the reply vchizzle

[markie]

My favorite PRS HB! Really great guitars............... Congrats Vaughn

[DarrenJ1973]

Congrats, Charcoal Burst is what i'll be going for when I get my 1st US PRS

[vchizzle]

Thanks markie! I'm really looking forward to writing some new songs specifically for this guitar.

Darren- CB is easily one of the coolest PRS colors.

[vchizzle]

thanks for the reply vchizzle

Measuring the body edge it's about 2 1/16" vs about 1 7/8" on my stripped 58. Keep in mind that doesn't take into account the added thickness of top and back carve on either guitar with the SCHB having top and back carves.

[jbloggs]

thanks vchizzle

So not that thick really. Probably no thicker than my Gibson LP Heritage Lite (thinner than a "real" LP).

Hope to check one out next week if the shop hasnt sold it by then.

Still tossing up between the Hollowbody II and a P22 though.

[bird_droppings]

Give me a break. I realize the picture is missing the decimal. The fact the picture was taken 3/14 and the pic is 314...never mind.

I was being silly.

[vchizzle]

Spent band practice working on a new song with her today. Sounded really good. Think I'm going to change the 3 low strings to a bit heavier gauge, maybe like a set of 12's on the lower strings but keep the 11, 14 and 20w on the top. Still trying to decide what I want to do for the DI. Considering the Radial DI, Baggs para(I like the idea of shaping the eq in case I don't hear what I want out of the monitor at a gig), also some other type that's got maybe compression and a bit of verb? I don't know - gotta research what's out there.

[jbloggs]

Hi vchizzle - one more question - What size is the factory fitted string set ?

11 to 48?

[aduayer]

I got one just like yours and I can't tell you: you got a winner there. congratz and have fun!

[vchizzle]

Hi vchizzle - one more question - What size is the factory fitted string set ?

11 to 48?

Something like that, it's the set they sell on the PRS site with the wound G.

[vchizzle]

Thanks Alex

[jbloggs]

vchizzle

thanks again

[vchizzle]

Finally got the Radial pro DI box and it works great! Got a bad feeling I'm gonna want a P22 in short order.

[38Roars]

Crazy nice flames !!

[prsrocker1988]

Very nice!

[Egads]

Finally got the Radial pro DI box and it works great! Got a bad feeling I'm gonna want a P22 in short order.

I've been using a passive DI for all my piezo-equipped guitars, and needed another. I ended up going with the LR Baggs Para DI, to add a little more EQ flexibility before the board. I've used one in the past with acoustic guitars, but now I'm blown away by the tone with the P22 and a couple other solidbody piezo guitars. It's so rich and full...and super quiet! They are on sale at GC right now, too.