Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: Singing the Praises of the 2-Channel "C"

  1. #1

    Singing the Praises of the 2-Channel "C"

    I'm a bit sad to find that it's not offered anymore. Personally I did a lot of listening via YouTube between the "H" and the "C" and I thought the "C" was suited more to my tastes. I like that upper-mid growl that EL34 power sections produce. When I received it, I opened it up and found a small Belton 3-spring reverb unit. It's not the lushest verb but being a small unit, it will never "sproing" if the head is knocked about (yes, I tried this test). I also found inside, Winged C EL34s for which I was pleasantly surprised - good tubes. The "C" is for the Cinemag output transformer which adds a bit of cost to the head. I usually use a Bogner Alchemist 2-12 (Celestion Greenback G12M and G12H) open back cab with this head. But I've also open her up with a Marshall 1960A loaded with Greenbacks - very tight and woody bass. Just about any shade of clean can be had on the clean channel but the lead channel is where this amp shines. The key to a great Marshallesque dirt tone with this amp is to carefully set the bass control. Too much and it gets flabby - seems like the sweet spot is between 9 and 12 o'clock. I also place a Boss ME-70 multi-FX in the effects loop for modulation and delay and also use the boost on the ME-70 and/or an Exotic Effects RC Booster. The RC, especially, lets me set a bit of crunch with the lead channel gain and boost with more hair for solos without changing the basic EQ. Anyway, I love this head and would like to see a Custom version of it. How about it Doug Sewell?

  2. #2
    The HXDA has a Cinemag transformer, but I'm not sure if it's the same one. If it is and you want a Custom amp, I'd highly recommend it.

    In any event, they're sure making great amps, aren't they?
    I saw ten thousand talkers whose tongues were all broken...

    Website: http://www.elfxi.com

  3. #3
    Some call me.... Tim
    Join Date
    Sep 2012
    Location
    Annapolis, MD
    Posts
    32
    I have one of the first 20 "C" amps that were released before they started labelling them "2 channel C" and love it.

  4. #4
    Name Manglin' Putz alantig's Avatar
    Join Date
    Apr 2012
    Posts
    2,714
    Quote Originally Posted by TJIann View Post
    I have one of the first 20 "C" amps that were released before they started labelling them "2 channel C" and love it.
    +1.
    Alan

    "I watched approximately 45 seconds of 'Rock Of Ages'. It was like getting punched in the soul." - Abby Krizner

  5. #5
    Can you have too many? Buildermike's Avatar
    Join Date
    Apr 2012
    Location
    NoVA & MA when I can
    Posts
    220
    Quote Originally Posted by TJIann View Post
    I have one of the first 20 "C" amps that were released before they started labelling them "2 channel C" and love it.
    +1 from another owner of the first twenty.

  6. #6
    deus ex machina
    Join Date
    Apr 2012
    Location
    Maryland
    Posts
    388
    Quote Originally Posted by LSchefman View Post
    The HXDA has a Cinemag transformer, but I'm not sure if it's the same one. If it is and you want a Custom amp, I'd highly recommend it.

    In any event, they're sure making great amps, aren't they?
    The 50W Cinemag output transformer was blueprinted from a famous 50W Marshall head. All of the 50W amps use the same Cinemag output transformer.

  7. #7
    Senior Member andy474x's Avatar
    Join Date
    May 2012
    Location
    West Michigan
    Posts
    1,157
    So how do you gents like the C's compared to the H's? I've not tried a C but from what I've heard clips of, the cleans sound great and have a bit of a different flavor from the H - a really great EL34 clean that you don't hear very often...

    I was also a bit disappointed that the C is being discontinued. I think with appropriate revisions like the H has gotten, it could definitely stay relevant.
    -I'm no expert, but it seems to work and I haven't electrocuted myself yet. Which is pretty much the standard I live by.

    S2 Custom 22 Semi-Hollow - SE Akesson+57/08's - SE Custom 24 25th Anniversary - SE 30 Head/Cab

  8. #8
    Opaque John Beef's Avatar
    Join Date
    Apr 2012
    Location
    Arizona USA
    Posts
    1,783
    The differences between transformers are a bit over my head, but I have run 6L6s and EL34s and 6550s all in the same amp and my ears prefer EL34s. I'm sure the C didn't sell well because the H was (on the surface) the same amp for $300 less than the C.
    The Bovine Fury <-- stream and download our album "Eleven by Twelve" for free.
    05 Custom 22 with DGT pickups ~ 07 Mira with old birds ~ 08 SE Baritone Fralin/Suhr pickups ~ 03 SE Santana

  9. #9
    Quote Originally Posted by TJIann View Post
    I have one of the first 20 "C" amps that were released before they started labelling them "2 channel C" and love it.
    I have one also and it is my #1.

    Quote Originally Posted by andy474x View Post
    So how do you gents like the C's compared to the H's? I've not tried a C but from what I've heard clips of, the cleans sound great and have a bit of a different flavor from the H -
    I have both. To my ear, the C has far superiors cleans. The H has more modern dirt whereas the C tends to crunch.
    (513 / P22 / McShootout / DC 245 Ted / DGT / DC22 / Santana / Cu22 Rosewood / 408 Rosewood / SAS / Cu22 Semi hollow / Sig LTD / Mira korina / HBII / SE Angelus Custom / SE Mushok) >> {Archon, C, H, Dallas, Original Sewell}

  10. #10
    Quote Originally Posted by TJIann View Post
    I have one of the first 20 "C" amps that were released before they started labelling them "2 channel C" and love it.
    +1 love my 2 Channel C. just purchased a flame maple panel for it yesterday!!!!
    ZebraPRS
    Guitars: 1989 PRS Custom; 1995 PRS Custom (24); 20?? PRS Custom 24 Custom Zebra Stripes, 2009 25th McCarty NF, 2014 Brushstroke 24, 2013 PRS HBII,
    Amps: PRS Original Sewell 50 watt #43 with Paisley 2x12 cab; PRS Pre-Prod 2 Channel C with 2x12 DB Cabinet, PRS Custom 10 watt head

  11. #11
    Some call me.... Tim
    Join Date
    Sep 2012
    Location
    Annapolis, MD
    Posts
    32
    I'm thinking about bringing mine over to PTC to have it housed in paisley with a flame maple face plate

  12. #12
    Junior Member NL_DGT's Avatar
    Join Date
    May 2014
    Posts
    5
    Quote Originally Posted by watelessness View Post
    I have one also and it is my #1.



    I have both. To my ear, the C has far superiors cleans. The H has more modern dirt whereas the C tends to crunch.
    I realize this is an old thread but I have come across a new old stock 2 Channel C. Unfortunately it's not close enough for me to actually test out. We play a lot of 80's covers and hard rock (ac/dc, G n R, Kizz). H or C?

  13. #13
    Quote Originally Posted by NL_DGT View Post
    I realize this is an old thread but I have come across a new old stock 2 Channel C. Unfortunately it's not close enough for me to actually test out. We play a lot of 80's covers and hard rock (ac/dc, G n R, Kizz). H or C?
    both will be quite satisfactory. are you the only guitar in the band?
    (513 / P22 / McShootout / DC 245 Ted / DGT / DC22 / Santana / Cu22 Rosewood / 408 Rosewood / SAS / Cu22 Semi hollow / Sig LTD / Mira korina / HBII / SE Angelus Custom / SE Mushok) >> {Archon, C, H, Dallas, Original Sewell}

  14. #14
    Junior Member NL_DGT's Avatar
    Join Date
    May 2014
    Posts
    5
    Quote Originally Posted by watelessness View Post
    both will be quite satisfactory. are you the only guitar in the band?
    Not usually but at times yes. We do play some Eagles, Steppenwolf at times. Want to make sure the H is not too hot for those type of tracks.

  15. #15
    sounds like we cover similar groups: http://www.hungrydingo.com/

    i use the C to get wicked cleans and great crunch. lead guitar uses a pedal board through a Dallas.
    (513 / P22 / McShootout / DC 245 Ted / DGT / DC22 / Santana / Cu22 Rosewood / 408 Rosewood / SAS / Cu22 Semi hollow / Sig LTD / Mira korina / HBII / SE Angelus Custom / SE Mushok) >> {Archon, C, H, Dallas, Original Sewell}

  16. #16
    Junior Member NL_DGT's Avatar
    Join Date
    May 2014
    Posts
    5
    Thanks. Looks like the C might be better all around fit for me.

  17. #17
    Junior Member NL_DGT's Avatar
    Join Date
    May 2014
    Posts
    5
    Had my 2 channel C arrive today. I have to say, I do not understand why this was discontinued. The clean channel goes from clean to break up amazingly. The lead channel has just the right amount of gain. It dials up crunch with out getting garbled. What a linear response from the gain control. Playing through a boogie 2 x 12 with v30's. Great pairing.

    http://postimg.org/image/ophbb0jjp/
    Last edited by NL_DGT; 06-12-2014 at 08:08 PM.

  18. #18
    That's a beautiful rig!

    I use the same cab with my HXDA. Sounds great.

    It is sad to discontinue a great amp...but maybe they had good reasons.

    What does the 2 channel Custom 50 have for a transformer?
    I saw ten thousand talkers whose tongues were all broken...

    Website: http://www.elfxi.com

  19. #19
    Senior Member jfb's Avatar
    Join Date
    Dec 2012
    Location
    O'Fallon, MO
    Posts
    5,685
    I've hear a lot of people singing praises of the C. Must be a wickedly good amp.
    Plank Owner

  20. #20
    Junior Member NL_DGT's Avatar
    Join Date
    May 2014
    Posts
    5
    Quote Originally Posted by LSchefman View Post
    That's a beautiful rig!

    I use the same cab with my HXDA. Sounds great.

    It is sad to discontinue a great amp...but maybe they had good reasons.

    What does the 2 channel Custom 50 have for a transformer?
    I think it's the Heyboer. I think it's basically an H with more bells and whistles.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •