SE Bernie Marsden spare backplate?
I recently purchased an SE Bernie Marsden and I was also lucky enough to get the backplate signed. The only problem is I don't want the signature to get scratched of as it has already started to do. So I looked on the PRS shop and I couldn't find the backplate to fit this guitar, so if anyone would know where I could find one that would be great
I'm not sure where you can find a backplate - BUT before the PRS Store offered singlecut shaped backplates for SE guitars, I had two that were signed. I asked this same question and someone suggested Krylon clear coat to spray on them. It worked like a charm and now they stay on the guitars.
Flip it over so the sig is on the inside.
The Bernie is a pretty unique backplate because of the control layout. It's also backed with some silver foil for shielding with countersunk screwholes.
Two options are to find a way to add a protective coat to the plate that doesn't harm the sig, or...
Use the existing plate as a template and draw around it, including screw holes. take a note of the depth and see if there's anyone who could use that template to cut you a new plate from Perspex or something. Glue some foil to the back and job done!
Hello Luke, take a look here:
I hope can help you. Bye!
Tags for this Thread