Page 1 of 2 12 LastLast
Results 1 to 20 of 33

Thread: Modded my HBII!

Hybrid View

  1. #1
    Senior Member LJD's Avatar
    Join Date
    May 2012
    Posts
    296

    Modded my HBII!

    I set out to remove the piezo system and install dual coil splits on my HBII. I had never wired or soldered anything in my life. A few days of memorizing schematics and watching how-to videos online and I was ready to dive in. It was tricky, but... success!!! Kinda proud of myself. The 53/10's sound really cool split in the HBII. Jangly and spanky, and I really can't hear any volume loss. The middle combos of one-split, one-humbucking is very cool. Have to explore these single coil sounds some more...




    Lookin' good.

  2. #2
    A♥ hoards guitars A♥ rugerpc's Avatar
    Join Date
    Jun 2012
    Location
    deep in the raspberry...
    Posts
    2,914
    Nice!
    Thbbbbbt...
    Check it out: Phillybri used to have a band: Resonance But he's soooo over them now!

    sɹǝqɯǝɯ uɐıןɐɹʇsnɐ oןןǝɥ

  3. #3
    Senior Member RedGuitars's Avatar
    Join Date
    Apr 2012
    Location
    DFW
    Posts
    520
    No way I would have tackled that job - good work!
    ___________
    Mike Cantrell

  4. #4
    Senior Member jfb's Avatar
    Join Date
    Dec 2012
    Location
    O'Fallon, MO
    Posts
    4,830
    Boss.
    Plank Owner

  5. #5
    Great work! I wouldn't have had the cojones to do it!

    I wish that PRS would offer the option of not having the piezo, it's something I will never use. Didn't stop me from ordering one, but I wish...
    If something is too hard to do, then it's not worth doing. You just stick that guitar in the closet next to your short-wave radio, your karate outfit and your unicycle and we'll go inside and watch TV.
    -- Homer J. Simpson

  6. #6
    Mmmm singlecuts.. Fbrandw's Avatar
    Join Date
    Apr 2012
    Location
    Alberta, Canada
    Posts
    99
    Very nice

  7. #7
    Goatee Practitioner Danerada's Avatar
    Join Date
    Apr 2012
    Location
    Stevensville, MD
    Posts
    963
    Those pictures terrified me!!!!
    - Dane

    He had a voice that could make a wolverine purr and suits so fine they made Sinatra look like a hobo.

  8. #8
    Senior Member LJD's Avatar
    Join Date
    May 2012
    Posts
    296
    Quote Originally Posted by Danerada View Post
    Those pictures terrified me!!!!
    I'd be lying if I said I didn't sweat nervously through most of it.

  9. #9
    Dislocated Boy Tosca's Avatar
    Join Date
    Apr 2013
    Location
    Driving towards the daylight....
    Posts
    219
    Did you do this because you didn't like the piezo? Or just wanted the single coil sounds more? I love the combo single coil/piezo sounds on my P24...and thinking of adding coil split capability to my HB2...without removing the piezo. I had to have a drink to calm down after viewing those pictures....you are brave and skilled!!!
    For as long as we may think as we will and speak as we
    think, the condition of man will proceed in improvement.
    Thomas Jefferson

  10. #10
    Senior Member LJD's Avatar
    Join Date
    May 2012
    Posts
    296
    Quote Originally Posted by Tosca View Post
    Did you do this because you didn't like the piezo? Or just wanted the single coil sounds more? I love the combo single coil/piezo sounds on my P24...and thinking of adding coil split capability to my HB2...without removing the piezo. I had to have a drink to calm down after viewing those pictures....you are brave and skilled!!!
    As piezos go, the PRS setup is the best. That being said I personally don't like any piezo electric sound. I wanted dual coil splits more, and didn't want to drill new holes in the guitar. This way it's reversible. The cool thing was that the hole for the blend control pot is smaller than the volume and tone pot holes, so the mini toggle fit in there fine.

    Really liking these new pickup combinations!

  11. #11
    Owner!
    One Life

  12. #12
    Senior Member sergiodeblanc's Avatar
    Join Date
    Apr 2012
    Location
    Downers Grove Il.
    Posts
    5,147
    I like it! I can't get down with piezos either, single coil splits on the other hand....

  13. #13
    Junior Member BuckyB's Avatar
    Join Date
    Jun 2013
    Location
    Chatsworth, Ca
    Posts
    9
    Why didn't you just use push/pull pots?

  14. #14
    Dislocated Boy Tosca's Avatar
    Join Date
    Apr 2013
    Location
    Driving towards the daylight....
    Posts
    219
    My understanding is...not enough room for P/P pots in these...so mini toggle is required. That means drilling a new hole, or, as ingeniously done in this case, using existing piezo blend pot hole for this.
    For as long as we may think as we will and speak as we
    think, the condition of man will proceed in improvement.
    Thomas Jefferson

  15. #15
    Junior Member
    Join Date
    Nov 2012
    Posts
    20
    Quote Originally Posted by Tosca View Post
    My understanding is...not enough room for P/P pots in these...so mini toggle is required. That means drilling a new hole, or, as ingeniously done in this case, using existing piezo blend pot hole for this.
    My HB11 has a push pull, the dealer's tech did it. The push pull is on the tone switch and is where the 3 way is normally (tone control and 3 way swapped positions).

  16. #16
    Junior Member BuckyB's Avatar
    Join Date
    Jun 2013
    Location
    Chatsworth, Ca
    Posts
    9
    Quote Originally Posted by Gtrnut View Post
    My HB11 has a push pull, the dealer's tech did it. The push pull is on the tone switch and is where the 3 way is normally (tone control and 3 way swapped positions).
    Hmmm, i like this idea. When you say "3 way", I assume you're talking about the magnetic p/u selector, not the piezo switch, right? Got pics?

  17. #17
    Wheels cjmwrx's Avatar
    Join Date
    Jun 2012
    Location
    Chicago, IL.
    Posts
    336
    Nice work. Making these things ours is searching for the tone the same way Jimmy did back in the day.

  18. #18
    Senior Member LJD's Avatar
    Join Date
    May 2012
    Posts
    296
    After another day of playing with the new setup I have this to report: this guitar has been unleashed, full potential. Getting great tones with the split coils (I'll try to post some audio later). Wow, I love this guitar!

  19. #19
    Plank Spanker justmund's Avatar
    Join Date
    Apr 2012
    Location
    Down under, down under
    Posts
    1,536
    Great job! Can't wait to hear some audio

  20. #20
    Senior Member Rider1260's Avatar
    Join Date
    Jun 2013
    Posts
    326
    Way cool mod !!!!
    PRS Family - SCT, 408, 305, CU22, MEII
    Others LesPaul , Stratocaster , Guild
    Amps - Mesa MK2B , Egnater Tweaker 15
    Effects - Tonal Insanity Guitar Effects ( I make them ) TC Electronics Nova

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •