Results 1 to 12 of 12

Thread: SC trem (solid rosewood neck) questions!?!

  1. #1

    SC trem (solid rosewood neck) questions!?!

    First off...This is my 3rd PRS, and they are all AMAZING instruments...That being said...

    Ok...So I got my '07 SC trem with solid rosewood neck in today...While it FEELS amazing, the rosewood neck is outstanding...Im curious about this tone. It has #6 pickups, which I hear arent the most favorite around here...

    I plug in, and instanly feel like "where the balls? Wheres the tone? Whats going on here?

    The tone coming out is very weak (not neccessarily in terms of output, not that its great, but just fullness wise), not full at all, and it very thin and puny. Now I would ASSUME that Mahogany and rosewood Would ake a fat, full sound.

    My question is...is it the pickups, or do these guitars just sound small and banjo-like?

    What should the rosewood be contributing? I know it FEELS amazing!

    http://s254.photobucket.com/albums/hh110/fatbagg/

  2. #2
    Plank Spanker justmund's Avatar
    Join Date
    Apr 2012
    Location
    Down under, down under
    Posts
    1,866

    Re: SC trem (solid rosewood neck) questions!?!

    I can't imagine it came out of the factory sounding 'thin and puny'...

    Have you popped the control cavity to make sure everything is ok in there?
    Does this happen on all pickup settings?
    Does your tone control do anything?
    Has this model got a coil tap?

  3. #3
    Junior Member
    Join Date
    Apr 2012
    Posts
    74

    Re: SC trem (solid rosewood neck) questions!?!

    #6 pickups do not fit the guitar very well. Get ahold of some 59/09s, and you will be very happy!
    - cyclops

    Too many PRS to list in 5 lines...

  4. #4
    Large Member
    Join Date
    Apr 2012
    Posts
    154

    Re: SC trem (solid rosewood neck) questions!?!

    Clops is right. The #6 are loved by few. 59/09's in that will rock.

  5. #5
    Junior Member
    Join Date
    Apr 2012
    Posts
    15

    Re: SC trem (solid rosewood neck) questions!?!

    That's been a common occurrence with the #6 pickups. I think it's partially that they're lower output pickups, and partially that guys who play them, have the idea that they're higher output than what they are. Kind of a Catch-22 there if you will. While I'll agree in not being a huge fan of the #6 pickups, they do have a great tone to them in the right context, and with right amp. A friend of mine has the same guitar you do, and swears by the #6's through his old JCM800. To each his own I guess.

    You're not alone my friend. Do your research, find the pups that work for you!

  6. #6

    Re: SC trem (solid rosewood neck) questions!?!

    The problem I am having now is...the 3 bridge humbuckers I have...NONE of them fit! That is kinda a bummer...I suppose I need shortleg pickups? Ive noticed that it seems the dimarzio and duncan pickups work, b ut longleg handwound pickups (the three I have anyways) wont fit.

  7. #7
    Recovering Bass Player ]-[ @ n $ 0 |v| a T ! 's Avatar
    Join Date
    Aug 1985
    Posts
    5,104

    Re: SC trem (solid rosewood neck) questions!?!

    Quote Originally Posted by fatbagg
    My question is...is it the pickups, or do these guitars just sound small and banjo-like?
    Tone is SO subjective. Not sure how anyone could answer that in meaningful terms. What matters is YOU don't like #6 pickups in your guitar, with your strings, through your rig, in your environment. That's all you really need to know.

    If everyone were to say "No way, #6's are awesome" (not holding my breath) you would still be in the same situation.

    So... I say yank those bad boys and try something new!

    Give the crowd an idea what your amp and signal path look, what strings you use, and what tone you're after so we can give you suggestions that might narrow your options.
    One Life

  8. #8
    Junior Member
    Join Date
    Apr 2012
    Location
    Orange, CA
    Posts
    23

    Re: SC trem (solid rosewood neck) questions!?!

    I have a 2007 IRW SCT and I wanted it to have balls. I already had the singlecut PAF tones covered so I stayed away from the 5708s and 5909s. I went with EVH Wolfgangs which scream.


  9. #9
    Senior Member Brad737's Avatar
    Join Date
    Apr 2012
    Location
    Cincinnati, OH
    Posts
    690

    Re: SC trem (solid rosewood neck) questions!?!

    I replaced the bridge pickup with a Wolfgang as well. It sounds better than my EVH Wolfgang. Plus, they have zebra coils, so they look stock. (I did swap the polepiece screws with gold ones...)

    Quote Originally Posted by ACE
    I have a 2007 IRW SCT and I wanted it to have balls. I already had the singlecut PAF tones covered so I stayed away from the 5708s and 5909s. I went with EVH Wolfgangs which scream.
    Model citizen...Zero discipline

    http://reverb.com/shop/brad737

  10. #10
    Senior Member Daniel's Avatar
    Join Date
    Apr 2012
    Posts
    633

    Re: SC trem (solid rosewood neck) questions!?!

    Hans is quite right (no surprise). Tone is subjective. I love the way my SCT-IRW sounds with the #6s but it does take different amp settings than a guitar with 245s, 57/08s, HFS/VBs, etc. You might also play around with the pup and pole-piece height before you switch them out.

  11. #11
    Junior Member
    Join Date
    Sep 2012
    Posts
    1
    Yeah, that's the pickups not the neck. I have a CU24 with a wide thin solid rosewood neck. And it sounds really thick, yet balanced, with great harmonics, and very lush sounding (especially through a Mark IV). But I have EMG's in it (for the moment). However, I like my Tremonti II's pickups and may try out a set in the CU24 rosewood at some point. But it's all a preference of personal taste. And I just prefer hotter pickups overall and even more so with the solid rosewood neck (much like ACE above).

  12. #12
    What kind of tones are you looking for (for example, vintage, modern high gain, etc)?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •