Results 1 to 4 of 4

Thread: bridge replacement

  1. #1
    Junior Member
    Join Date
    May 2013
    Posts
    4

    bridge replacement

    I would change my bridge with a tonepros AVT2. I want to change Aldo the actual studs and inserts (bushings/anchors) with the tonepros locking ones. The bushings/anchors on the PRS Se are Like the Gibson, they are 1/2" ( about 13 mm), aren't they? Could you measured it? I nave measured with a caliper and they were about 13 mm. But the thread in our inserts isn't like the Gibson (it isn't 5/16-24", isn't US thread) it is metric M8 x 1.25. Now the problemi: the metric kit of locking studs (bushings/inserts + studs) sold by tonepros has bushings that are 7/16" diameter, so they are to small for our holes. What can i do? I would install the studs and bushings.

  2. #2
    Junior Member
    Join Date
    May 2013
    Posts
    4
    PS tonepros made a set of locking studi which are for Gibson but they are with US thread

  3. #3
    Senior Member andy474x's Avatar
    Join Date
    May 2012
    Location
    Boston
    Posts
    974
    Why replace the bushings? Just get the metric kit and use the studs.

    Great tailpiece though, love mine. Will definitely put it on any SE in the future.
    -I'm no expert, but it seems to work and I haven't electrocuted myself yet. Which is pretty much the standard I live by.

    SE Custom 24 25th Anniversary - SE Akesson+57/08's - SE 30 Head/Cab

  4. #4
    Junior Member
    Join Date
    May 2013
    Posts
    4
    I was corious. They might ne 7/8", don't they?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •