Results 1 to 15 of 15

Thread: My current hybrid build

  1. #1
    Junior Member
    Join Date
    Nov 2013
    Location
    San Antonio
    Posts
    42

    My current hybrid build

    I ordered a Warmoth jaguar neck with no inlays and the compound 10-16" radius.
    I based the body on a jaguar/jazzmaster but trimmed it up a bit in certain areas.
    It's a semi-hollow bubinga body with my favorite type of quilt pattern on the maple top.
    My inspiration for the 2-stage stain with natural binding should be blatantly obvious. lol

    The tele bridge pickup is a Chris White custom wound to 10k with alnico 8 pole magnets. The neck humbucker is a Gibson 496R with an alnico 2 mag swap.

    2 volumes, 1 tone, 3-way toggle. I'm thinking about doing a push/pull for phasing too.

    I'm not proud of the workmanship, because all i had to work with was a jig saw and forstner bits.



    Last edited by rumblebox; 12-20-2013 at 10:28 AM.
    71 LP goldtop - Burstbucker 1, Chris White mini-hum neck
    LTD Horizon with 3 humbuckers - Burstbucker 3, Burstbucker 2, Burstbucker 1
    LTD M-100 - brass Floyd block, Bill Lawrence USA L500XL, GFS A2 Classic(A5)
    Lap steel made from scraps and a diseased ash tree - GFS A2 Classic
    JSX with low-gain preamp tubes, KY77's, and custom enclosures(ostrich), Texas Heats

  2. #2
    Darn nice work, there!
    I saw ten thousand talkers whose tongues were all broken...

    Website: http://www.elfxi.com

  3. #3
    Senior Member Bill SAS 513's Avatar
    Join Date
    Aug 2012
    Location
    Manchester, Maryland
    Posts
    739
    Beautiful top, nice work...can you tell me about that neck???...I see an adjustment on the side of it, which reminds me of an older PBC/Bunker style where the nut is attached to the truss rod and supports all of the string pressure, instead of the neck itself. I found them very interesting, in their day.

  4. #4
    Senior Member
    Join Date
    Jan 2013
    Location
    Driffield. U.K
    Posts
    410
    good to see another home luthier doing his own thing. nice work my friend
    I am not a luthier but i am in my own workshop.
    https://www.facebook.com/driffguitar

  5. #5
    chief Shawn@PRS's Avatar
    Join Date
    Aug 1985
    Location
    Stevensville, MD
    Posts
    3,899
    Looking good!

  6. #6
    Junior Member
    Join Date
    Nov 2013
    Location
    San Antonio
    Posts
    42
    Quote Originally Posted by Bill SAS 513 View Post
    Beautiful top, nice work...can you tell me about that neck???...I see an adjustment on the side of it, which reminds me of an older PBC/Bunker style where the nut is attached to the truss rod and supports all of the string pressure, instead of the neck itself. I found them very interesting, in their day.
    it has the heel truss rod, but the side adjuster keeps you from having to remove the neck pickup to make adjustments. i like it.

    71 LP goldtop - Burstbucker 1, Chris White mini-hum neck
    LTD Horizon with 3 humbuckers - Burstbucker 3, Burstbucker 2, Burstbucker 1
    LTD M-100 - brass Floyd block, Bill Lawrence USA L500XL, GFS A2 Classic(A5)
    Lap steel made from scraps and a diseased ash tree - GFS A2 Classic
    JSX with low-gain preamp tubes, KY77's, and custom enclosures(ostrich), Texas Heats

  7. #7
    That Video Guy crgtr's Avatar
    Join Date
    Apr 2012
    Location
    Nashville, TN
    Posts
    1,126
    NICE!!
    Chris Reynolds...Nashvegas TN
    CR Guitar Demos
    More guitars than I can afford!
    #1 fan of Doug "DA MAN" Sewell!!

  8. #8
    Senior Member sergiodeblanc's Avatar
    Join Date
    Apr 2012
    Location
    Downers Grove Il.
    Posts
    6,762
    Yeah buddy!

  9. #9
    Junior Member
    Join Date
    Nov 2013
    Location
    San Antonio
    Posts
    42
    Started laying the sanding sealer today.

    71 LP goldtop - Burstbucker 1, Chris White mini-hum neck
    LTD Horizon with 3 humbuckers - Burstbucker 3, Burstbucker 2, Burstbucker 1
    LTD M-100 - brass Floyd block, Bill Lawrence USA L500XL, GFS A2 Classic(A5)
    Lap steel made from scraps and a diseased ash tree - GFS A2 Classic
    JSX with low-gain preamp tubes, KY77's, and custom enclosures(ostrich), Texas Heats

  10. #10
    Senior Member swede71's Avatar
    Join Date
    May 2012
    Location
    Stockholm
    Posts
    646
    Looks really cool.I like offset bodies like jazzmaster and jaguar alot.What back contour on the neck?I love warmoth boatneck contour.

  11. #11
    Junior Member
    Join Date
    Nov 2013
    Location
    San Antonio
    Posts
    42
    Quote Originally Posted by swede71 View Post
    Looks really cool.I like offset bodies like jazzmaster and jaguar alot.What back contour on the neck?I love warmoth boatneck contour.
    I think it's a thin U.
    71 LP goldtop - Burstbucker 1, Chris White mini-hum neck
    LTD Horizon with 3 humbuckers - Burstbucker 3, Burstbucker 2, Burstbucker 1
    LTD M-100 - brass Floyd block, Bill Lawrence USA L500XL, GFS A2 Classic(A5)
    Lap steel made from scraps and a diseased ash tree - GFS A2 Classic
    JSX with low-gain preamp tubes, KY77's, and custom enclosures(ostrich), Texas Heats

  12. #12
    Junior Member Tree's Avatar
    Join Date
    Feb 2014
    Location
    Baltimore MD
    Posts
    59
    Nice work !

  13. #13
    And there is a guitar that i would like to have myself.... BTW nice mate!

  14. #14
    Junior Member
    Join Date
    Nov 2013
    Location
    San Antonio
    Posts
    42



    71 LP goldtop - Burstbucker 1, Chris White mini-hum neck
    LTD Horizon with 3 humbuckers - Burstbucker 3, Burstbucker 2, Burstbucker 1
    LTD M-100 - brass Floyd block, Bill Lawrence USA L500XL, GFS A2 Classic(A5)
    Lap steel made from scraps and a diseased ash tree - GFS A2 Classic
    JSX with low-gain preamp tubes, KY77's, and custom enclosures(ostrich), Texas Heats

  15. #15
    Junior Member
    Join Date
    Nov 2013
    Location
    San Antonio
    Posts
    42









    71 LP goldtop - Burstbucker 1, Chris White mini-hum neck
    LTD Horizon with 3 humbuckers - Burstbucker 3, Burstbucker 2, Burstbucker 1
    LTD M-100 - brass Floyd block, Bill Lawrence USA L500XL, GFS A2 Classic(A5)
    Lap steel made from scraps and a diseased ash tree - GFS A2 Classic
    JSX with low-gain preamp tubes, KY77's, and custom enclosures(ostrich), Texas Heats

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •