Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Thread: Cant' figure out what happened to my tremolo/bridge ~~~

  1. #1

    Cant' figure out what happened to my tremolo/bridge ~~~

    So, I'm playing my CU24 and after I used the trem bar (lightly) I felt the whole bridge "drop down" as if something got loose. Next thing, all my strings are one step down and out of tune.

    I tuned it back up and noticed that, this time, when I try to bring the trem bar in an up position, it doesn't budge; it only goes down a la some Fender Stratocaster trems. Turns out the whole bridge is very close to the body.

    What happened here?
    Modern Eagle II (2008); SC58 Ted McCarty AP (2012); SC245 Soapbar 10-Top (2009); Tom Anderson Hollow T Classic (2000); Performance Relic Strat w/ Ramos Neck; 1985 48th St Custom Shop Custom Tele; Engl Sovereign Vintage 100 1x12.

  2. #2
    Name Manglin' Putz alantig's Avatar
    Join Date
    Apr 2012
    Posts
    2,646
    Knife edge out of the groove?
    Alan

    "I watched approximately 45 seconds of 'Rock Of Ages'. It was like getting punched in the soul." - Abby Krizner

  3. #3
    Quote Originally Posted by alantig View Post
    Knife edge out of the groove?
    I think so ....
    Modern Eagle II (2008); SC58 Ted McCarty AP (2012); SC245 Soapbar 10-Top (2009); Tom Anderson Hollow T Classic (2000); Performance Relic Strat w/ Ramos Neck; 1985 48th St Custom Shop Custom Tele; Engl Sovereign Vintage 100 1x12.

  4. #4
    Auth. PRS Dealer GC Ron's Avatar
    Join Date
    Apr 2012
    Posts
    129
    Did you do a string change before it happened?
    Ron Lucas
    Guitar Center Cincinnati
    ronald.lucas@guitarcenter.com
    513-671-4555

  5. #5
    Quote Originally Posted by GC Ron View Post
    Did you do a string change before it happened?
    Yes, a couple of days ago.
    Modern Eagle II (2008); SC58 Ted McCarty AP (2012); SC245 Soapbar 10-Top (2009); Tom Anderson Hollow T Classic (2000); Performance Relic Strat w/ Ramos Neck; 1985 48th St Custom Shop Custom Tele; Engl Sovereign Vintage 100 1x12.

  6. #6
    chief Shawn@PRS's Avatar
    Join Date
    Aug 1985
    Location
    Stevensville, MD
    Posts
    3,734
    slacken string tension, make sure the fulcrum screws are all the same height and put the knife edge back on the screw ledges. It should be fine.

  7. #7
    Thanks for the advice. I'm going to bring it back to GC and have them fix this since I've never had this experience before, and learn from the tech for future reference.
    Modern Eagle II (2008); SC58 Ted McCarty AP (2012); SC245 Soapbar 10-Top (2009); Tom Anderson Hollow T Classic (2000); Performance Relic Strat w/ Ramos Neck; 1985 48th St Custom Shop Custom Tele; Engl Sovereign Vintage 100 1x12.

  8. #8
    Senior Member jfb's Avatar
    Join Date
    Dec 2012
    Location
    O'Fallon, MO
    Posts
    5,640
    Quote Originally Posted by enigma View Post
    Thanks for the advice. I'm going to bring it back to GC and have them fix this since I've never had this experience before, and learn from the tech for future reference.
    Probably a good idea. Keep us posted.
    Plank Owner

  9. #9
    Occasionally Onery Member CantankerousCarl's Avatar
    Join Date
    Apr 2012
    Posts
    1,000
    +1000 on Shawn's advice - slacken (or remove) string tension on ANY PRS trem (Core, S2, SE) before you do any work to / adjustments on it.

    Enigma - guess it depends on the skill of the GC tech - most folks s/b able to reseat the trem back on the screws - anything beyond that, make sure you take it to someone who knows what they are doing (PTC or trusted, reputed 3rd party).

    I used to be scared, but after reading pretty much everything there is out there on the subject, and taking things really slowly and carefully, I have brought the trems on 2 of my used CEs back to factory spec (floating 1mm) - the previous owners had them way too low, and it was bothering me.
    1990, 91, 92 & 97 CE24s | 1991 CU24 | 2003 & 04 SE EG SSS | 2008 SE Semi-Hollow Soapbar
    2011 CU24 GC Throwback | 2012 Signature Limited | 2013 408 Brazilian | 2013 Paul's Guitar
    2013 Hollowbody II | 2013 CU24 Swamp Ash Limited | 2013 XPRS 408 Semi-Hollow
    2013 S2 Mira | 2013 CU24 | 2014 CU24 Semi-Hollow

  10. #10
    Quote Originally Posted by CantankerousCarl View Post
    +1000 on Shawn's advice - slacken (or remove) string tension on ANY PRS trem (Core, S2, SE) before you do any work to / adjustments on it.

    Enigma - guess it depends on the skill of the GC tech - most folks s/b able to reseat the trem back on the screws - anything beyond that, make sure you take it to someone who knows what they are doing (PTC or trusted, reputed 3rd party).

    I used to be scared, but after reading pretty much everything there is out there on the subject, and taking things really slowly and carefully, I have brought the trems on 2 of my used CEs back to factory spec (floating 1mm) - the previous owners had them way too low, and it was bothering me.

    So, the official factory spec for CU24 and CE24 trem is 1 mm? The tech at this particular GC has the best reputation and previously worked at a famous Guitar Shop in the NYC area.

    BTW, I only changed strings on my CU24 before this happened. The only reason I could think of is that I went from a 9 to a 10 gauge. Still, I've done this many times, and this is my first experience with this happening. Good thing it happened during practice!
    Modern Eagle II (2008); SC58 Ted McCarty AP (2012); SC245 Soapbar 10-Top (2009); Tom Anderson Hollow T Classic (2000); Performance Relic Strat w/ Ramos Neck; 1985 48th St Custom Shop Custom Tele; Engl Sovereign Vintage 100 1x12.

  11. #11
    FIXED! Plus, it received a great set up! Plays even better now. Excellent GC service at Paramus, NJ. The tech there is one of the better ones out there (his name is Gil).

    Modern Eagle II (2008); SC58 Ted McCarty AP (2012); SC245 Soapbar 10-Top (2009); Tom Anderson Hollow T Classic (2000); Performance Relic Strat w/ Ramos Neck; 1985 48th St Custom Shop Custom Tele; Engl Sovereign Vintage 100 1x12.

  12. #12
    Plank Spanker justmund's Avatar
    Join Date
    Apr 2012
    Location
    Down under, down under
    Posts
    1,790
    Good result!

    The actual spec is closer to 1.6mm (1/16" = 1.56mm). I use a piece of 1.6mm aluminium to set my bridge height.

    http://www.prsguitars.com/csc/bridges.html

  13. #13
    Senior Member Michael B's Avatar
    Join Date
    Apr 2012
    Location
    Saratoga Springs New York
    Posts
    902
    sweet..glad you got it sorted out!
    2010 Black cherry 10 Top Tremonti-signed by Tremonti Modded by PTC DGT frets/signed by PRS
    2012 FBJB 10 top Tremonti-signed by Tremonti
    2012 Tremonti CustomSE Grey/Black heavily modded, DGT frets and nut at PTC
    2014 ARCHON

  14. #14
    Happy Egads's Avatar
    Join Date
    Oct 2012
    Location
    Boulder, CO
    Posts
    2,140
    Glad to hear. That's a beautiful CU (as is your green CE!).

  15. #15
    Quote Originally Posted by justmund View Post
    Good result!

    The actual spec is closer to 1.6mm (1/16" = 1.56mm). I use a piece of 1.6mm aluminium to set my bridge height.

    http://www.prsguitars.com/csc/bridges.html

    Thanks for that! Actually, the tech told me he didn't need (nor want) to know the specs. I was a bit worried until I tried out his work - 'nuff said!
    Modern Eagle II (2008); SC58 Ted McCarty AP (2012); SC245 Soapbar 10-Top (2009); Tom Anderson Hollow T Classic (2000); Performance Relic Strat w/ Ramos Neck; 1985 48th St Custom Shop Custom Tele; Engl Sovereign Vintage 100 1x12.

  16. #16
    Quote Originally Posted by Egads View Post
    Glad to hear. That's a beautiful CU (as is your green CE!).
    Thanks! I am especially happy with these 2 purchases (as you can tell)!
    Modern Eagle II (2008); SC58 Ted McCarty AP (2012); SC245 Soapbar 10-Top (2009); Tom Anderson Hollow T Classic (2000); Performance Relic Strat w/ Ramos Neck; 1985 48th St Custom Shop Custom Tele; Engl Sovereign Vintage 100 1x12.

  17. #17
    Occasionally Onery Member CantankerousCarl's Avatar
    Join Date
    Apr 2012
    Posts
    1,000
    Thanks guys for correcting me on the trem height. I panicked for a second...my brain was thinking 16ths (what my ruler is) but my hands went with mm.

    The guys @ GC Paramus are generally pretty good to deal with - that's where my 408 Brazzy came from when they were having their 49th anniversary sale over the summer.

    That's a some nice-a flame up close...
    1990, 91, 92 & 97 CE24s | 1991 CU24 | 2003 & 04 SE EG SSS | 2008 SE Semi-Hollow Soapbar
    2011 CU24 GC Throwback | 2012 Signature Limited | 2013 408 Brazilian | 2013 Paul's Guitar
    2013 Hollowbody II | 2013 CU24 Swamp Ash Limited | 2013 XPRS 408 Semi-Hollow
    2013 S2 Mira | 2013 CU24 | 2014 CU24 Semi-Hollow

  18. #18
    Quote Originally Posted by CantankerousCarl View Post
    Thanks guys for correcting me on the trem height. I panicked for a second...my brain was thinking 16ths (what my ruler is) but my hands went with mm.

    The guys @ GC Paramus are generally pretty good to deal with - that's where my 408 Brazzy came from when they were having their 49th anniversary sale over the summer.

    That's a some nice-a flame up close...
    Good to see a fellow NJ member here! Here's a store pic that shows the flame a bit better:

    Modern Eagle II (2008); SC58 Ted McCarty AP (2012); SC245 Soapbar 10-Top (2009); Tom Anderson Hollow T Classic (2000); Performance Relic Strat w/ Ramos Neck; 1985 48th St Custom Shop Custom Tele; Engl Sovereign Vintage 100 1x12.

  19. #19
    Senior Member
    Join Date
    Feb 2013
    Location
    NJ
    Posts
    749
    Quote Originally Posted by enigma View Post
    Good to see a fellow NJ member here!

    Agree. That makes at least three of us!

  20. #20
    Quote Originally Posted by Tag View Post
    Agree. That makes at least three of us!
    Nice! I'm sure there's a quite a few more!
    Modern Eagle II (2008); SC58 Ted McCarty AP (2012); SC245 Soapbar 10-Top (2009); Tom Anderson Hollow T Classic (2000); Performance Relic Strat w/ Ramos Neck; 1985 48th St Custom Shop Custom Tele; Engl Sovereign Vintage 100 1x12.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •