Results 1 to 4 of 4

Thread: 59/09 pickup install help/opinions

  1. #1

    59/09 pickup install help/opinions

    I'm considering buying a pair of 59/09s to install in me CE22 (either the all hog or the maple capped). That way I have a CE22 and something close to a Custom.

    - Can I do this? Will I still have the split coils?
    - what's the biggest difference in to between the Dragon II and the 59/09s?
    - how much would it be to have PRS do this?
    - is $300 a fair price for the pair?
    - what would you do?
    Acoustics: . . . . . . . . . . . Larrivée LV-03E | Larrivée LV-09E
    Electrics:. . . . . . . . . . . . .PRS 305 | PRS CE22 | PRS Signature Limited Eriza verde
    Synth:. . . . . . . . . . . . . . . Yamaha ES6

  2. #2
    Senior Member Proxmax's Avatar
    Join Date
    May 2012

    Re: 59/09 pickup install help/opinions

    $300 is very cheap - guess hard to get for that price.
    Bavarian Barbarian

  3. #3
    Senior Member vchizzle's Avatar
    Join Date
    Apr 2012

    Re: 59/09 pickup install help/opinions

    -Yes, you can. You should have split coils as long the pickup has the wiring(if they came out of a custom 24 you should be good). Check with the seller to find out how many wires they have. If they can email pics, that's best.
    -Dragon II is more modern, hotter, and much easier to get for a reasonable price
    -It's not exactly cheap to have PRS do it, shipping your guitar PTC and ask. If you have the means and no-how, do it yourself.
    -$300 is a great price.

  4. #4
    Junior Member
    Join Date
    May 2012

    Re: 59/09 pickup install help/opinions

    As vchizzle stated, if the pickups have the correct wiring they will work. I've seen pickups wired 2 different ways that you can utilize the coil split option. The PRS pickup wiring I've seen has a single conductor braided wire (braided shield is your ground) and an additional coated single conductor wire. This additional wire is used as your coil split. It connects to either your pull/push pot or double throw mini toggle switch. Your guitar should have one or the other, but not both.

    The other type or eire I've seen is a 4 conductor wire. You have a hot, a ground and the other 2 wires are twisted together and used as you coil split connection. If you go to the PRS website, there are schematics that show how to wire each way. You probably have the 2 wire situation, since they are PRS pickups.

    Wire everything yourself. It really isn't too difficult. Imo, the most difficult solder joint is connecting the shield to the pot. That joint requires more solder to make a good connection. Just make sure you heat the pot & wire fairly well, so the solder will melt and bond well.
    PRS 25th Anniversary Mira 245 Soapbar; 2000 PRS Singlecut; 2010 PRS Mira; 2009 PRS Sunburst SC 245 PF09 Nitro finish; 2012 PRS Santana Signature; Taylor GC8; Germino Club 40; Soldano Hot Rod 50; Tone Tubby Red alnico; Weber Chicago

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts