AMAZING WORK!!!
AMAZING WORK!!!
Too many and never enough...
That's pretty awesome right there!
I notice the drill points on the old fingerboard.... to get a steam point in?
Love it - as always, flawless execution my friends.
Paul Reed Smith 7 - S t r i n g A c t i v i s t | Fueled by P T C
Awesome Work!!!
Chasing Fragile Harmonics...
Originally Posted by Baimun
I think you are seeing the place where Scott marked the fretboard to show him where the guide pins are located. Each neck/board has three guide pins to assure the board is properly positions on the neck and that the fret slots aren't accidently cut through the inlays.
Are they just marked or are they drilled out. The dots on the surface of the old board look like there is a hole where each of the guide pins used to be.
I think you are seeing the place where Scott marked the fretboard to show him where the guide pins are located. Each neck/board has three guide pins to assure the board is properly positions on the neck and that the fret slots aren't accidently cut through the inlays.
I've marked the holes where the guide pins go in red and the grease pencil marks showing where the guide pins are located under the board are noted in blue.
Note, the middle guide pin is still in the neck, the other two are open holes prior to guide pin installation
Last edited by Shawn@PRS; 09-20-2012 at 06:59 PM.
That's really cool...always wondered how you did that!
-Bob
Very, very cool.
Bill
PRS Private Stock #3568
PRS Swamp Ash Special
Mesa Mark V combo
Fishman Loudbox Artist
PTC....you guys continue to amaze me!!! Great job and please post these all the time, love the amazing products that come out of the best company in the world...PRS
2010 Black cherry 10 Top Tremonti-signed by Tremonti Modded by PTC DGT frets
2011 SE245..PRS USA nut,Phase II tuners, PRS USA pots and knobs, Dragon II in the neck, Seymour d Alternative 8 in bridge, PRS USA stoptail bridge
2010 Mira Vintage Mahogany -Dragon I pup in the bridge
2012 PRS Tremonti Custom SE Grey/Black PRS Phase 2 tuners, Mannmade 2000NOS Trem
Thanks Michael. Yours will be done before you know it!
Here is a recent refin we did for a customer. Was Gray Black, now Blue Matteo.
Before
After
Last edited by Shawn@PRS; 09-20-2012 at 07:00 PM.
That's awesome Mr. Nuthall!
Excellent work!
sweet!
-Bob
Thanks guys!
Here's a repair we did a while back. The headstock was broken and a bad repair was attempted by someone other than PRS. Many of the wood pieces were missing so we did some reconstructive surgery.
How it arrived at the factory
Glued up and ready for finish
Ready to Rock
Last edited by Shawn@PRS; 09-20-2012 at 07:03 PM.
Awesome work y'all are doing Shawn. Top notch fo sho!!
Chris Reynolds...Nashvegas TN
CR Guitar Demos
More guitars than I can afford!
#1 fan of Doug "DA MAN" Sewell!!
That headstock repair is incredible. Amazing work! Bummer about having to lose the small logo though... what year is the guitar?
Last edited by FrankiePRS; 06-10-2012 at 12:01 AM.
Artist Endorser: PRS Guitars, VVT Amps, 2Tek Bridges, Eyeland Straps
I spy a Skitchy mohawk in the refinish photos! haha Both jobs are amazing as usual.
Paul Reed Smith 7 - S t r i n g A c t i v i s t | Fueled by P T C
Posting Permissions
Reply With Quote
