Page 1 of 2 12 LastLast
Results 1 to 20 of 40

Thread: NGD 4-1-2014 2014 PRS SE Zach Myers

  1. #1
    PRS Addiction CoreyT's Avatar
    Join Date
    Jun 2012
    Location
    Auburn, WA. USA
    Posts
    3,818

    NGD 4-1-2014 2014 PRS SE Zach Myers

    2014 PRS SE Zach Myers

    Well, I got hit by a severe case of GAS (Gear Acquisition Syndrome) again after learning of the new PRS SE Zach Myers coming out.
    Scale length and neck wise it is pretty much like my SE Santana at 24.5" scale, and a wide/fat neck.
    I prefer the 25" scale length and a wide/thin pattern thin neck better, but this plays really nice.
    Plus the neck has a satin finish on it which makes moving up and down the neck very easy, in fact it is very slick, I wish all necks were finished like this.

    When I got my youngest son his 2012 SE Semi-Hollow back in September of 2012, I could not put it down.
    The semi-hollow has a nice ring to it, and no feedback (unless you want it) when an amp is cranked up.

    I had my dealer put on some vintage locking tuners as I wanted to keep the same look.
    This is a departure for me since all of the other SEs I have bought I had the dealer put on the Planet Waves Autotrim locking tuners.
    Had them put on a set of Ernie Ball Cobalts in 9-42 for me also, I run that gauge and brand on all of my guitars, they just feel right to me.
    I also had them put on the Tonepro locking studs/inserts for two reasons:
    1. Increased sustain, and it does sustain quite well.
    2. String changing when I take them all off at once to clean the fret board the tail piece is locked down and will not fall off.
    Had that happen to my '73 Les Paul decades ago.
    The only other things I did was swap out the stock truss rod cover and put on the official PRS forum truss rod cover, and a set of Schaller Strap Locks which I run on all of my guitars.

    I got to play it Thursday night (4-3) for the first time through one of my amps, and it sounds very nice.

    This is a very nice guitar and they are selling like hotcakes, dealers allover are running out of stock as soon as they come in.
    Here are some pictures bellow, they were taken with my new Canon T5i on the auto setting.
    The last group shot picture was taken without a flash just a bit ago on landscape mode with a dark room, but the camera gathers in a lot of light.





    I like the light natural color of the wood on the back too, just like my sons SE Semi-Hollow I got him back in 2012 for his birthday.









    I also like how the light natural color of the sides blend with the darker color of the top wood.





    Links:
    SE Zach Myers Signature

    TK-0735-001 Gotoh Locking Tuners Vintage 3x3 Nickel

    Schaller Security Strap Locks - Nickel Via Amazon


    Tonepros Locking Studs For PRS Metric

    Here are a few videos from winter 2014 NAMM with Zach and his new signature guitar.
    If you search YouTube also you will find some more videos from forum members who have uploaded their own.

    2014 PRS SE Zach Myers Signature Model




    PRS SE Zach Myers Electric Guitar - NAMM 2014




    Here is a video from Richard Lainegard who is a member here.
    Note that if you read the comments in his video, Zach Myers replied, pretty cool.

    PRS SE Zach Myers 2014 Demo Play Through


  2. #2
    PRS Addiction CoreyT's Avatar
    Join Date
    Jun 2012
    Location
    Auburn, WA. USA
    Posts
    3,818

    Continued, 10 picture limit per post



    Closeup of the PRS forums TRC, I have it on three of my guitars now.
    The guitar here, my SE Tremonti Custom, and my 408.
    I think it looks pretty cool with the birds/moon theme.


  3. #3
    Senior Member rubalup's Avatar
    Join Date
    Sep 2013
    Location
    Colombia
    Posts
    201
    congrats Corey, enjoy it! very nice guitar.

    Love how it looks on the group pics.

  4. #4
    Almost was a FG22 owner.. WEDGE's Avatar
    Join Date
    Apr 2012
    Location
    Too close to the casinos in CT.........
    Posts
    2,037
    FINALLY! Congrats
    ​Secretary of Crackwood Addiction

  5. #5
    Just a member JustRob's Avatar
    Join Date
    Sep 2012
    Location
    Severn, MD
    Posts
    1,802
    Congrats! Hope it is all you've been dreaming of!

  6. #6
    Senior Member veinbuster's Avatar
    Join Date
    Apr 2012
    Location
    GTA, or PA, or vacation
    Posts
    3,138
    Congratulations.
    I'm really liking these guitars.

  7. #7
    PRS Addiction CoreyT's Avatar
    Join Date
    Jun 2012
    Location
    Auburn, WA. USA
    Posts
    3,818
    Thanks guy's.
    I have a SKB flight case showing up for it today as I found out (posted in my other thread) that the ZM will not lay flat in the PRS hardshell case.
    I put the ZM into my SE Tremonti Customs SKB case, and it fits perfectly.

    Took the day off since I have a checkup at the doctor in a bit, so I will get some more playing time on it later today through my Blackstar ID 60 amp.
    If I ever get another stop tail guitar, the Tonepro locking studs are going into it too.

    I sure wish PRS would release an SE bass, I want to pick up a bass next.

  8. #8
    Senior Member sleary's Avatar
    Join Date
    Sep 2012
    Posts
    1,552
    Happy new guitar day Cory. Knew you waited awhile for this one.
    2013 PRS DGT,2011 PRS CU24, 2015 Esp Ltd Ironcorss, 2015 Ibanez RG 2550E
    1988 Washburn G1V
    Orange TH30 . Saxon 2x12 cabinet

  9. #9
    Senior Member
    Join Date
    Aug 2013
    Location
    Elkridge, MD
    Posts
    273
    Very nice.... how do you like the replacement tuners?
    PRS 2002 McCarty Hollowbody I
    PRS 2008 Custom 24 - 10 Top - Rosewood Neck
    PRS 2008 McCarty Korina - Stripped 58
    PRS 2014 DGT - Rick Toone S2 - Trussart 2015 Steelcaster
    Amps: 3 Monkeys-Sock Monkey/Mesa Boogie Recto-Verb 25

  10. #10
    PRS Addiction CoreyT's Avatar
    Join Date
    Jun 2012
    Location
    Auburn, WA. USA
    Posts
    3,818
    Thanks Sleary.
    Ordered on Valentine's day, and it came in on April Fools Day

    Vox, I really like the tuners, wish I had known about them for my SG.
    It has the Autotrims too like my other SEs.

    These were a drop in with no modification to the ZM at all.

  11. #11
    Senior Member Todd_FindingMyWay's Avatar
    Join Date
    Sep 2013
    Location
    Hebron, CT
    Posts
    224
    Congrats Corey...very very nice.
    Begin the day with a friendly voice, a companion unobstrusive..

  12. #12
    Senior Member sergiodeblanc's Avatar
    Join Date
    Apr 2012
    Location
    Downers Grove Il.
    Posts
    8,003
    Bangin'!

  13. #13
    Name Manglin' Putz alantig's Avatar
    Join Date
    Apr 2012
    Posts
    3,410
    Quote Originally Posted by CoreyT View Post


    Congrats, Corey! It's been a long ride to get here, but I'm glad you're digging the guitar.
    Alan

    "I watched approximately 45 seconds of 'Rock Of Ages'. It was like getting punched in the soul." - Abby Krizner

  14. #14
    Junior Member
    Join Date
    Dec 2012
    Posts
    15
    great pics and thanks for posting.

    So (when i finally get around to getting my hands on a ZM), I can just order these tuners you linked and drop them in (I have no previous experience with installing tuners ... would love to have it be my first DIY guitar project, but do not want to drill anything)
    http://www.allparts.com/TK-0735-001-...el_p_3635.html
    Are these basically the same as the Gotoh SD90's i've been reading about in other ZM threads?

    thanks

  15. #15
    PRS Addiction CoreyT's Avatar
    Join Date
    Jun 2012
    Location
    Auburn, WA. USA
    Posts
    3,818
    Thanks Alan!

    Hi JC, thanks, and these are truly a drop in tuner.
    No drilling or reaming of the shaft hole.
    These are Gotoh's, Allparts sells many tuner brands and repackages them it looks like.
    My dealer said that they are Gotoh's.

    Not sure if they are an SD90 or not, but these are the same that Les Paul users have been dropping into their guitars, and they happen to fit PRS''s perfectly.
    The barcode scan tag says 6 45208 01737 7, and when I scanned the tag with my Smartphone, it showed them as Gotoh's.
    Made in Japan too, not China.

  16. #16
    Sweet guitar! I hope you have lots of enjoyment with it!
    I saw ten thousand talkers whose tongues were all broken...

    Website: http://www.elfxi.com

  17. #17

  18. #18
    Occasionally Onery Member CantankerousCarl's Avatar
    Join Date
    Apr 2012
    Posts
    1,117
    Congrats Corey, have been following this saga and am pleased to see and hear it end well.
    1990, 91, & 92 CE24s | 1991 CU24 | 2000 CU22 Semi-Hollow | 2004 & 05 SE EGs
    2008 SE Semi-Hollow Soapbar | 2011 CU24 GC Throwback | 2012 Signature Limited x2
    2013 408 Brazilian | 2013 Paul's Guitar | 2013 Hollowbody II | 2013 CU24
    2013 XPRS 408 Semi-Hollow | 2014 CU24 Semi-Hollow | 2015 S2 Vela

  19. #19
    Junior Member Chitarrista scarso's Avatar
    Join Date
    Apr 2013
    Location
    Italy
    Posts
    91
    Very nice Corey. Congrats!

  20. #20
    Congrats
    PRS SE ZM 2014; IBANEZ JS 2000; IBANEZ JS 700 CUSTOM
    FENDER BLUES JUNIOR3 FSR LTD
    PLEXTONE BOUTIQUE AMP
    ORANGE PPC 112

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •